Discussion
My alarm is not sounding does any one know a retailer where i can get a new siren as im pretty sure mine is knackerd. Ive tried the company traiding as autowatch uk and they are a pile of s
t. they havent got back to me and ive phonned three times in two weeks. Also they wont sell me a new one before their tech guy has spoken to me(how ridiculous its only a siren)incase the problem comes back. eventhough ive given them background info like what car its off and that others have had the same problem and fixed with a new siren ect ect.
Steve
t. they havent got back to me and ive phonned three times in two weeks. Also they wont sell me a new one before their tech guy has spoken to me(how ridiculous its only a siren)incase the problem comes back. eventhough ive given them background info like what car its off and that others have had the same problem and fixed with a new siren ect ect.Steve
Mine has packed up as well, not really done enough digging to say it is correct, but was wondering about this one http://www.abacuscaralarms.co.uk/alarmshop/index.p...
Anybody know ?
Cheers,
Rob.
Anybody know ?
Cheers,
Rob.
Cross posting from NobleForums owners section (across the pond), in case you don't have access, and assuming similar model, which may be rash:
WordUpMag:
Some members wanted to know how to turn off the chirp while engaging and disengaging the alarm so I will post it here.
Firstly, to get program mode on autowatch rl160i...and a few other models
you need to enter code 1,2,3 via the ignition switch....then the 2 digit code for the feature you want to enable/disable...
to enable program mode-
Switch ignition on - red LED will light
switch ignition off and the led will start to flash... immediately after 1 flash turn the ignition on again - thus entering '1' into the system
now switch ignition on again and get steady LED, switch ignition off, and this time wait two flashes before turning the ignition on again - you have now entered '2'
do same as above to enter '3' after 3 flashes of the LED
after 1,2,3 the LED will flash rapidly to let you know you are now in program mode....
you can now enter the two digit codes for the feature you want - this is done in the same way as above - using the flashes of the led to signal the digits... so....
to enable/disable the 'chirps' - use code 8,8 - that is ignition off, wait 8 flashes then ignition on again - then again ignition off, wait 8 flashes and back on again - the alarm will sound a confirmation as follows - chirps on = one 'beep', chirps off = 2 beeps.
you can enter as many program codes as you like without having to repeat the 1,2,3 sequence...
other useful codes....
2,2 - door open warning sound
3,3 - doors lock/unlock with engine on/off
6,6 - proximity alarm (needs an additional radar sensor)
0,0 - return to factory default settings
9,9 - Central locking delay (9,9 will be for lengthening/shortening the delay of the central locking trigger signal confirmed by 2 beeps longer delay, 1 beep shorter delay)
WordUpMag:
Some members wanted to know how to turn off the chirp while engaging and disengaging the alarm so I will post it here.
Firstly, to get program mode on autowatch rl160i...and a few other models
you need to enter code 1,2,3 via the ignition switch....then the 2 digit code for the feature you want to enable/disable...
to enable program mode-
Switch ignition on - red LED will light
switch ignition off and the led will start to flash... immediately after 1 flash turn the ignition on again - thus entering '1' into the system
now switch ignition on again and get steady LED, switch ignition off, and this time wait two flashes before turning the ignition on again - you have now entered '2'
do same as above to enter '3' after 3 flashes of the LED
after 1,2,3 the LED will flash rapidly to let you know you are now in program mode....
you can now enter the two digit codes for the feature you want - this is done in the same way as above - using the flashes of the led to signal the digits... so....
to enable/disable the 'chirps' - use code 8,8 - that is ignition off, wait 8 flashes then ignition on again - then again ignition off, wait 8 flashes and back on again - the alarm will sound a confirmation as follows - chirps on = one 'beep', chirps off = 2 beeps.
you can enter as many program codes as you like without having to repeat the 1,2,3 sequence...
other useful codes....
2,2 - door open warning sound
3,3 - doors lock/unlock with engine on/off
6,6 - proximity alarm (needs an additional radar sensor)
0,0 - return to factory default settings
9,9 - Central locking delay (9,9 will be for lengthening/shortening the delay of the central locking trigger signal confirmed by 2 beeps longer delay, 1 beep shorter delay)
Gassing Station | Noble | Top of Page | What's New | My Stuff