Rattle noise
Author
Discussion

niccy b

Original Poster:

122 posts

185 months

Sunday 17th April 2011
quotequote all
Me again, so driving the beast around today and it's started to make rattling noise from behjnd me. It's not the exhaust, it's sound like the undertray but untill I get it on some ramps I can't be sure. Does any1 suggest other stuff I should look for? Thanks smile

GTO600

1,877 posts

280 months

Sunday 17th April 2011
quotequote all
Probably a turbo heatshield.

joust

14,622 posts

288 months

Sunday 17th April 2011
quotequote all
If it's a 'tinny' ratlle see above. Not much else to rattle in the rear.

J

snuffy

13,202 posts

313 months

Sunday 17th April 2011
quotequote all
Yep, could well be the turbo heat shield. It's a piss-poor bit of aluminium that snaps. I fixed mine with a bit of metal from B&Q and come screws instead of the rivots that hold it together.

JAZ 34

568 posts

272 months

Monday 18th April 2011
quotequote all
Exhaust bracket?

Ady_ftta

50 posts

205 months

Monday 18th April 2011
quotequote all
I had a rattle behind me - turned out to be the strap which holds the petrol tank in place was loose!

LScaterham

400 posts

185 months

Monday 18th April 2011
quotequote all
I think it was the heatshield that caused the rattle in my Dad's M12.

Rob_W

1,070 posts

243 months

Tuesday 19th April 2011
quotequote all
Check if the front turbo to intercooler pipe can touch the alternator as it vibrates.

AMG Merc

11,955 posts

282 months

Tuesday 19th April 2011
quotequote all
I had what sounded like a rattle but only when hot - lower ball-joint would you believe!

R0162

2,435 posts

193 months

Wednesday 20th April 2011
quotequote all
If its a tinny vibration type of rattle then i would say front turbo heat shield, but if not there are many potential causes, as above.
If the noise is resonating into the cabin then check to see if exhaust is touching chassis.
If it sounds like underpan then check under side pods, where plates over lap, if it is this then put a couple of rivets through to join them together.

R0162

2,435 posts

193 months

Wednesday 20th April 2011
quotequote all
btw if yu change the material of the front heat shield, it will not rattle, also you can pop a sound deadening pad on the existing.



I have now removed all heat shields from the engine bay due to wrapping headers, exhaust and turbos, this is a much more effective way of protecting surrounding components from heat damage and also helpsn improve airflow through engine bay.