kit cars and e-marked glass

[thecarbuilder246]

hi all IVA related query
new on here and after trying other forums thought I'd give this one a go.
I'm building a Ferrari replica and need some side glass made.From reading online
material any glass fitted must be e-marked,but I can find nobody able to do this.
most can cut the glass and temper it then etch with british kitemark and british
standards numbers but it seems this is no longer acceptable for iva. any suggestions
or help would be appreciated.
thanks ian

[530dTPhil]

Ian, I assume that the glasses that you require will be flat. If so there are a couple of companies that will produce small quantities, even singles, with an E mark. You need to allow up to four weeks and expect to pay a reasonable sum, perhaps between £50 and £100 per unit depending on size and tint. For this you should end up with the edgework to a high standard and the E mark the right way round and in the position that you want. The quality of the patterns is all important.

[gtmdriver]

Any chance of company names?

[khm]

struggled with this one myself, ended up using lexan with a special coating, only place in the country that can supply it with correct markings is
http://www.plastics4performance.com/default.asp?
took ages to find them, very help full, just sent a template, but it aint cheap stuff !!

[rog3k]

I don't know if any of the postings on this windscreen topic may be of assistance:
http://www.pistonheads.co.uk/gassing/topic.asp?h=0...

[thecarbuilder246]

Hi
thanks for the replies. for anyone interested I've be given a company name,and after contacting them via e-mail found that they can cut and temper flat glass in 4/5 and 6mm to templates and then stamp/etch with the correct e-marks. I wont post on here but if interested contact me.
cheers ian