Where can i get fog light & hazard stickers from?
Discussion
Ive used rocker switches for my rear fog light and hazard switches but they are not labelled so im on the hunt for some small hazard and rear fog light stickers to place on/above/near them to keep Mr IVA happy. The only problem is i cant seem to find any anywhere, anybody got any ideas?
CBS do a sheet of stickers for switches etc.
http://www.cbsonline.co.uk/product/Self_Adhesive_S...
http://www.cbsonline.co.uk/product/Self_Adhesive_S...
Edited by rdodger on Wednesday 7th November 18:32
You do not need symbols in this case.
from the section on rear fog...
Note 1: This may be achieved by an unlit pictogram (see section 33) or appropriate words, the tell tale may be any colour provided it cannot be confused with any other tell tale.
However some controls or indicators e.g. Brake fail warning use the following words...
18.
Where a warning lamp is provided as the only means of checking the fluid level without opening the reservoir, it must be secure, operational, visible during daylight and darkness from the driving position, and fitted with a “test facility” that enables its operation to be checked from the driving position without opening the reservoir.
In this case a sticky label or pictogram will not suffice as it does not comply with 'visible during daylight and darkness'. Have had a car fail on this.
Steve
from the section on rear fog...
Note 1: This may be achieved by an unlit pictogram (see section 33) or appropriate words, the tell tale may be any colour provided it cannot be confused with any other tell tale.
However some controls or indicators e.g. Brake fail warning use the following words...
18.
Where a warning lamp is provided as the only means of checking the fluid level without opening the reservoir, it must be secure, operational, visible during daylight and darkness from the driving position, and fitted with a “test facility” that enables its operation to be checked from the driving position without opening the reservoir.
In this case a sticky label or pictogram will not suffice as it does not comply with 'visible during daylight and darkness'. Have had a car fail on this.
Steve
Steve_D said:
You do not need symbols in this case....
....Note 1: This may be achieved by an unlit pictogram (see section 33) or appropriate words
Steve
Am i missing something here or does that state i need a symbol (pictogram) or words or is it just me? The fog light switch illuminates when its pressed and the hazard switch blinks. However at the moment i dont have anything to state which switch is for what.....Note 1: This may be achieved by an unlit pictogram (see section 33) or appropriate words
Steve
matlee said:
Am i missing something here or does that state i need a symbol (pictogram) or words or is it just me? The fog light switch illuminates when its pressed and the hazard switch blinks. However at the moment i dont have anything to state which switch is for what.
You just need words...a Dymo label would do.Steve
Gassing Station | Kit Cars | Top of Page | What's New | My Stuff