Ford Sierra MK1 Stalk Switches Wiring Diagram
Discussion
It's not for the Sierra, but here's my reverse-engineering of the Mondeo column:
http://aeon.tribbeck.com/17/
The colours are probably going to be the same, and they may even be in the same position (I used a Fiesta column in my previous kit car, and that was pretty similar - except it had the side/dip beam on another stalk, whereas the Mondeo has an additional switch).
http://aeon.tribbeck.com/17/
The colours are probably going to be the same, and they may even be in the same position (I used a Fiesta column in my previous kit car, and that was pretty similar - except it had the side/dip beam on another stalk, whereas the Mondeo has an additional switch).
Did you want to identify the wires and what colour does what, the locations of the different wires in the plugs or a numerical pin diagram for each plug.
I have a set I am fitting to my Dutton legerra that still have the wires attatched so can help with what colour goes where and as I have to trace the colours and identify the functions from the manual can copy you in on the results if you want that too.
I hate electrical spagetti.....
I have a set I am fitting to my Dutton legerra that still have the wires attatched so can help with what colour goes where and as I have to trace the colours and identify the functions from the manual can copy you in on the results if you want that too.
I hate electrical spagetti.....
Gassing Station | Kit Cars | Top of Page | What's New | My Stuff


