Westfield driveshafts ??

[cobdoo]

I have an SEI narrow Westfield and I'm trying to find a pair of driveshfts.
Can anyone tell me where I can get hold of some,or what else they were fitted to ie early Sierra.
It's the early SEI that uses an English diff in the Westfield alloy housing.
I think they are push fit one piece with uj's not cv joints

[Barry Ashcroft]

Get over to the wscc.co.uk register for the boardroom ask there.

I'm pretty sure the factory made them specially for there use

[cobdoo]

The boardroom has gone down.

[Barry Ashcroft]

No it aint

http://boardroom.wscc.co.uk/cgi-bin/ikonboard.cgi?

[cobdoo]

You are correct it is now.
I've just done a search in the wscc boardroom and they were Westfield only and no longer available.
I will put a wanted post on and hope I can find some second hand.

[Barry Ashcroft]

I expect you could get a propshaft company to make them for you

[cobdoo]

That didn't work, as a newbie you can't start a new topic............!
Or contact anyone.
I think you are right Bailey Morris Ltd can make most of it.
Some of the parts are Lotus/mk3 escort, diff output shafts were made I think by or for Ash Mason(wscc member)but as I said I can't contact him through wscc because i'm new

[Auntieroll]

The early Westfield driveshafts used the buyers Mk2 Escort/English diff halfshafts which were cut down and welded into the output shafts,I don't know what these were from though,but at the outer end,I believe they used a Fiesta Mk1/2 drive flange/hub ,but again the splined end of the driveshaft which mated with the hub is a mystery.The U/J's were standard Hardy-Spicer items.

I agree with trying Bailey Morris,they generally have the answer at a reasonable price in my experience.

[cobdoo]

Barry
Can you post something on the wscc Forum for me ?
As I said I can't post yet.

[Barry Ashcroft]

Yep
Post here I'll copy it across

You should be able to post soon there is a little delay as we had a lot of porn postings a while back

[Jon Ison]

Hi,

Someone like GB engineering from autograss fame would knock you up a pair at a very reasonable cost. Would be made from better material than stock to.



eta Geoff Berrisford Engineering are on 01270 841081. 110% recomended.

Edited by Jon Ison on Sunday 14th December 12:40

[cobdoo]

Barry Ashcroft said:

Yep
Post here I'll copy it across

You should be able to post soon there is a little delay as we had a lot of porn postings a while back

If you can put something in the parts wanted.

SEI narrow driveshafts wanted to fit english/Westfield diff

[cobdoo]

Jon Ison said:

Hi,

Someone like GB engineering from autograss fame would knock you up a pair at a very reasonable cost. Would be made from better material than stock to.



eta Geoff Berrisford Engineering are on 01270 841081. 110% recomended.

Edited by Jon Ison on Sunday 14th December 12:40

Thanks for that I will give them a call on Monday.
I will try and Google them.