3000m brake servo.

[aero340]

The brake master cylinder seals have leaked and the servo has collected all the brake fluid .what are my options besides buying a new one ? if any .thanks in advance kev.....

[bluezeeland]

Had the same, bought overhaul kit, no joy, so installed a new m/c........

[aero340]

Not to concerned about the brake MC just looking for options on the servo TR6 i think?

[bluezeeland]

Depends, on later cars it can be Cortina MkV (TR6 m/c is 4 pipe (or 2 pipe + PDWA), Cortina is 3 pipe + bias at rear)

Edited by bluezeeland on Tuesday 1st October 09:36

[prideaux]

aero340 said:

The brake master cylinder seals have leaked and the servo has collected all the brake fluid .what are my options besides buying a new one ? if any .thanks in advance kev.....

Kevin
Sorry to be the bearer of bad news but they are no longer available new the best option is to have it refurb i believe unless an early one
A

[Hansoplast]

I think the easier way is to buy another second hand one.
On internet a TR7 type + mastercilinder € 35,-
Just an idea.

Hans

[aero340]

2 quotes to refurb the servo £150+p+p plus vat the other £170+ the dreaded.Need a plan B

[hallsie]

Is it the 3 pipe/port one?

If so, Im sure a seal kit can be found, and Ill be doing mine next week so Ill let you know where and how.

In fact, if you are in the Kent area, whilst in doing one I may aswell do two!

Stu

[prideaux]

Hansoplast said:

I think the easier way is to buy another second hand one.
On internet a TR7 type + mastercilinder € 35,-
Just an idea.

Hans

You then have to adapt the peddle box to fit i believe.
I tried to get a new one for the Taimar hence i spent a long time refinishing i take it the brake fluid has corroded the Diaphragm

[aero340]

only just Purchased the car ,the previous owner had mentioned that it was loosing brake fluid but couldnt find a leak,so unsure how long the fluid has been in the servo,some time i suspect..the car is a 1977 model with the TR6 Master cylinder 2 outlets down to the 4 way valve .

[GadgeS3C]

Kev, I have a servo in the garage that came as a spare when I bought it. I recall that the previous owner said it needed reconditioning so I don't know its condition. If it's any use drop me a PM.
Gary

[phillpot]

Might be worth giving these guys a call?

[laikathedog]

Got mine here, direct replacement, fitted perfectly
http://www.rimmerbros.co.uk/Item--i-GRID600168