Discussion
Hi,
My petrol tank (3000 M) is leaking and is dripping through the rear valance. I'll have a look and see if I can use fuel tank putty to fix this. Do these tanks tend to leak at certain points (such as the end seams)?
Failing this, how hard are the tanks to remove, as I know POR do a fuel tank repair kit that I could try.
Thanks!
My petrol tank (3000 M) is leaking and is dripping through the rear valance. I'll have a look and see if I can use fuel tank putty to fix this. Do these tanks tend to leak at certain points (such as the end seams)?
Failing this, how hard are the tanks to remove, as I know POR do a fuel tank repair kit that I could try.
Thanks!
The other place where the tank can leak is where the inlet pipe from the fuel filler attaches to the tank (this is where my first tank failed).
Getting a tank out of an M is bit painful, it can be done without removing the rear window, but I would suggest removing at least one of the seats first.
I agree with Trevor, get a new one from Venny, but make sure that its been baffled to death, there's no point in putting a tank in with little baffling, you'll only wish a couple of months later that you had put a seriously baffled one in!!
davidy
Getting a tank out of an M is bit painful, it can be done without removing the rear window, but I would suggest removing at least one of the seats first.
I agree with Trevor, get a new one from Venny, but make sure that its been baffled to death, there's no point in putting a tank in with little baffling, you'll only wish a couple of months later that you had put a seriously baffled one in!!
davidy
Gassing Station | TVR Classics | Top of Page | What's New | My Stuff