Taimar Exhaust System modification
Discussion
Hi all,
I'm considering modifying my exhaust system to quieten my Taimar down.
My thought is to bring the two manifolds into one using a quieter muffler, then, exit the muffler from one into two towards the rear of the vehicle.,
Apparently according to the muffler technician's here the standard two in ,two out are straight through only whereas one in, one out utilises a proper muffling zig zag system.
I realise it may drop the hp back a bit but frankly I'm not that worried about that, I am primarily concerned with making the car less noisy for longer trips.
Q. Is there any real disadvantages to doing this or would the car be quite happy with this exhaust arrangement.?
Cheers Dave
I'm considering modifying my exhaust system to quieten my Taimar down.
My thought is to bring the two manifolds into one using a quieter muffler, then, exit the muffler from one into two towards the rear of the vehicle.,
Apparently according to the muffler technician's here the standard two in ,two out are straight through only whereas one in, one out utilises a proper muffling zig zag system.
I realise it may drop the hp back a bit but frankly I'm not that worried about that, I am primarily concerned with making the car less noisy for longer trips.
Q. Is there any real disadvantages to doing this or would the car be quite happy with this exhaust arrangement.?
Cheers Dave
It sounds like you do not have the OE exhaust system on the car.
OE systems 'were' fibre glass filled items back in the day, that eventually the product blew through and out leaving the boxes empty of sound deadening.
The system is manifold/S bends/one main box/two minor boxes/tail pipes. (JP exhausts).
As OE the manifolds (unless you have a turbo) are totally different and there is zero tuning on either for flow from the engine (it is simply misses the chassis), the S bends take the gasses into one box and onto two separate boxes and tails pipes.
After market systems with proper tuned manifolds were available that then had a three-into-one system balance tube and four cherry bombs through to the tail pipes (so matched and flowing as sides).
IMHO a separate set up without the manifolds would be worthless. A@
OE systems 'were' fibre glass filled items back in the day, that eventually the product blew through and out leaving the boxes empty of sound deadening.
The system is manifold/S bends/one main box/two minor boxes/tail pipes. (JP exhausts).
As OE the manifolds (unless you have a turbo) are totally different and there is zero tuning on either for flow from the engine (it is simply misses the chassis), the S bends take the gasses into one box and onto two separate boxes and tails pipes.
After market systems with proper tuned manifolds were available that then had a three-into-one system balance tube and four cherry bombs through to the tail pipes (so matched and flowing as sides).
IMHO a separate set up without the manifolds would be worthless. A@
Gassing Station | TVR Classics | Top of Page | What's New | My Stuff


