best seats for Vixen
Discussion
Talk to motordrive seats in Radcliffe near Bury.
They build some very nice and good quality / cost seats
in a vixen the law of diminishing returns applies. IE in my case I needed a fat seat for my arse but thin enough to fit in the car.
Top company
http://www.motordrive.com/acatalog/catalogbody.htm...
They build some very nice and good quality / cost seats
in a vixen the law of diminishing returns applies. IE in my case I needed a fat seat for my arse but thin enough to fit in the car.
Top company
http://www.motordrive.com/acatalog/catalogbody.htm...
You could try Corbeau.......
http://www.corbeau-seats.co.uk/road_gt4.htm
I think these are similar to the original seats, Corbeau were willing to make small changes when I bough some about 5 years ago.
I found the difficulty was getting any that were narrow enough to fit in - and then me fitting as well! I'm 6'1" but with a long back and short legs so had difficulty getting a set up with sufficient headroom. My car had spacers between the seat and its sub-frame at the front that increased the (fixed) seat rake, I re-used these which helped.
Phil
http://www.corbeau-seats.co.uk/road_gt4.htm
I think these are similar to the original seats, Corbeau were willing to make small changes when I bough some about 5 years ago.
I found the difficulty was getting any that were narrow enough to fit in - and then me fitting as well! I'm 6'1" but with a long back and short legs so had difficulty getting a set up with sufficient headroom. My car had spacers between the seat and its sub-frame at the front that increased the (fixed) seat rake, I re-used these which helped.
Phil
I have finaly fitted Cobra cub seats they fit the car nicely.
Could any one advice where I can get bonnnet pins as the ones fitted are not original I have enquired at DGs but they have none in stock.
Also need glovebox and sun visors as the guy I bought the car from binned then to save weight ( you could not make it up)
Thanks Alan
Could any one advice where I can get bonnnet pins as the ones fitted are not original I have enquired at DGs but they have none in stock.
Also need glovebox and sun visors as the guy I bought the car from binned then to save weight ( you could not make it up)
Thanks Alan
Edited by foxdog on Wednesday 7th July 14:49
Alan, just about to order a pair of Cobra Cubs. However I noticed in your photo a nice new carpet set which I also need. Did you buy this off the shelf or have it made specifically. Either way could you point me in the direction of where to go for carpets and how much they cost. Thx Steve
I found this a while ago
Clicky
Not specifically for a vixen, but I'm sure there can't be that many differences.
It can be done DIY style just by buying some carpet. We got some for our M, did the parcel shelf bit and both mats.
Some of the sections look quite tricky, but I'm sure with some time and patience it'll all be possible and look pretty good.
Clicky
Not specifically for a vixen, but I'm sure there can't be that many differences.
It can be done DIY style just by buying some carpet. We got some for our M, did the parcel shelf bit and both mats.
Some of the sections look quite tricky, but I'm sure with some time and patience it'll all be possible and look pretty good.
Edited by Cerberus90 on Monday 26th July 13:52
Gassing Station | TVR Classics | Top of Page | What's New | My Stuff