Vixen - Bias Pedal Box

[Seabass]

Does anyone have images of a bias pedal box using twin Girling cylinders to replace the TR6/Cortina brake master cylinder setup. I'm sure I've seen a picture around the web somewhere.

Thanks

James

[jerseyvixen]

hi will try and post pic later
i use a rallydesign bias box it bolts on in the engine bay works well
lloyd

[jerseyvixen]

see if this pic is posted

[spludge]

Pictures of a Tilton one here: http://www.britishracecar.com/MichaelZappa-TVR-Tus...

I am rebuilding a 2500 which has the original fit parts including the bias valve. I definitely need a new servo and brake and clutch master cylinders and was planning to use direct replacements but is this sort of setup a viable alternative for a road car? Please forgive my ignorance of such matters but is there a servo in there somewhere?

K

[heightswitch]

http://www.compbrake.co.uk/PEDALBOXES/PEDALBOXES6....

keep the servo and everything else!

N

[Seabass]

Thankyou for the input Gentlemen. Several different options for consideration.