Dummy Input Shaft

[Jetblackonetenth]

Has anyone got a 1 1/8" Dia 26 Tooth with 15mm spigot dummy gearbox shaft we could borrow to line our clutch up as it took ages last time without.

Thanks

Terry & Tim

[7 TVR]

I have just changed my input shaft and will check the size but if its the right one your welcome to use it as its sitting on my desk as a paperweight at the moment!

[Graham]

Tim I should have one later today, JR was going to send my old input shaft back with the gearbox and thats should be here via tnt.

its a stock t5 race box if that the same

G

[Jetblackonetenth]

Hi Graham

It is larger than a stock T5 which has a 1" shaft

Thanks

Terry

[wadsapple]

That would be a chevy imput shaft you need ? if so try craig winstanly he has just had my tko box off me that was 26 spline so should have his old box as it is in bits i think.

[Mr Jenks]

Do it the pro way, 3/8" extension and a roll of insulating tape

[cwin]

wadsapple said:

That would be a chevy imput shaft you need ? if so try craig winstanly he has just had my tko box off me that was 26 spline so should have his old box as it is in bits i think.

You would be welcome to it but it's on it's way back to the USA for repair, I have sent Tim, Craig Taylor's number he may have one,

[wadsapple]

thanx craig