Stack probs
Author
Discussion

bigrumbly

Original Poster:

99 posts

275 months

Monday 6th July 2009
quotequote all
I have one of the original Tuscan STACK systems. I am getting large variences in oil pressure and fuel pressure, when warm. Any one else found problems with their system.

David
Trevor the TVR Rallying

Graham

16,381 posts

313 months

Monday 6th July 2009
quotequote all
I've found my fuel pressure gauge is all over the place ( the manual one on the regulator is fine) the suggestion is its a knackered sensor apparently they do pack up with a lot of vibration.. I've also had a lot of problems with the wiring to my wheel speed sensor, it keeps breaking up, so maybe the age of the loom is a problem...

Chuggaboom

1,152 posts

277 months

Monday 6th July 2009
quotequote all
Stack do a refurb service...basically fix whatever the reported problem....I suspect they actually just bin the inards and replace rather than repair as its not worth their while if it comes back again with the 12 months.

IIRC was about 250 plus the dreaded tho.

TVRleigh_BBWR

6,553 posts

242 months

Monday 6th July 2009
quotequote all
Put a digital meter on the sensor output and see if the voltage is constant or all over the place, this will let you know if it's the display or sensor.

either that or you may want to connect the sensor output to your DL1, you can then log this information plus you will be able to tell if the sensor is faulty or if it's your dash. make sure you use a non pull-up input in the DL1