seac front

[bill tvr]

Anyone got a seac front for my tas...also looking for a lightweight onepiece removable front for my Tas...ideally id like to glass the seac front to the other..if that makes sense

[Graham]

I can do the s1 front to match the car, as either standard spec very light weight or 1 piece light weight removable.

G

[bill tvr]

hi Graham...is the s1 the seac

[Graham]

nope s1 is what you've got.

we've got moulds for the entire front in bulkhead( so can make any size section or 1 piece) and splitter for your car.

the S1 nose is slightly longer than the s2 ( that we can do as well) and we have the splitter for the s2. so an s2 front doesnt fit correctly.

the seac front is shorter and wider and the wheel arch profile is different

[NTEL]

Bill, I think Dave Stuart got his SEAC nose from Trevor Bee. Contact him to confirm.

[ctsdave]

Hi Bill,

We are trying to purchase the mould for the SEAC fromt end (as on ours) if you're interested in buying a front end of the same style as ours?

[bill tvr]

Thanks Dave...also what i want to do is remove the whole front end get a remvable s1 then cut that down and glass the seac to it ....if we did this and make a mould of it would that be something of interest to you aswell
Bill

[TVRleigh_BBWR]

bill tvr said:

Thanks Dave...also what i want to do is remove the whole front end get a remvable s1 then cut that down and glass the seac to it ....if we did this and make a mould of it would that be something of interest to you aswell
Bill

Not sure another mould would be worth it, would be better to do just as your planning i.e. get the one piece, and then bond the SEAC front onto it.

If you was going to do it I'd make sure it had a larger bonnet bulge, and wider front arches, as that the main problem, modification area

[TVR_owner]

bill tvr said:

Thanks Dave...also what i want to do is remove the whole front end get a remvable s1 then cut that down and glass the seac to it ....if we did this and make a mould of it would that be something of interest to you aswell
Bill

Bill,
Thats quite an expensive route to go...I costed a similar excercise for my bonnet

Edited by TVR_owner on Thursday 28th October 12:27

[Graham]

TVR_owner said:

Thats quite an expensive route to go...I costed a similar excercise for my bonnet

you anted to put a seac nose on a 3000m ?

[TVR_owner]

Graham said:

TVR_owner said:

Thats quite an expensive route to go...I costed a similar excercise for my bonnet

you anted to put a seac nose on a 3000m ?

Dohhhhh