Scratch build 250f inspired replica.
Scratch build 250f inspired replica.
Author
Discussion

Involute

Original Poster:

4 posts

As a kid I loved these cars, my first pedal car was based on one back in the 60s, after retiring and giving up motorcycles, I decided to build one more or less from scratch, I still have access to a machine shop inc CNC equipment etc, but decided to try and do this as it was done historically, using hand tools as much as possible, except a small lathe a Tig set and a Mig set, I could have gone it with just Oxy Acetylene, but don t like having it around the house, and when you get to my age you have to be realistic or it won t get finished.

I started this project a couple of years ago now, and have posted some stuff on other forums where I was looking for specific info on areas such as metal shaping, Alfa Romeo Busso engines etc.
Anyhow for various reasons, after making good initial progress it got stalled, house move from Yorkshire to the Southeast, followed by a year or so of DIY etc etc, during this time I had an ankle joint replacements that subsequently failed catastrophically, and to top it off I awoke from one of the many corrective surgeries to a detached retina, all this is boring I know but it gives context.

I eventually got back into this as my health improved, in fact this thing has helped preserve my sanity.

I believe I ve made good progress in the last 6 months or so, and decided to document it here, initially I will post some of the early stuff over the next couple of weeks or so as time allows, once up to date posting will undoubtedly slow a little, but I will keep it updated.
For those who don t know below is an image of Fangio with a later model 250f.
By way of an introduction I will post a few pic of a couple of bikes I ve built over the years and obviously some images of my progress so far.

As the title suggests this is not an exact replica but the finished car will be pretty close I hope.
Tubular space frame, with an all aluminium body, it will have a 3.0 24v V6 Busso engine which I have mated to an RX8 6speed box, rear wheel drive, I’m also and using some MX5 running gear.
All up weight when finished is anticipated to be around 600kg

Any comments question etc are encouraged.

Shaun







Edited by Involute on Tuesday 17th November 15:35


Edited by Involute on Tuesday 17th November 15:36


Edited by Involute on Tuesday 17th November 15:43

rdodger

1,094 posts

234 months

Looking forward to this!

tight fart

3,620 posts

304 months

One of my most memorable motoring memories is following Tiff Needell driving a 250f around the Nurburgring, I’m following with interest and looking forward to some pics.

SlowWinter

22 posts

42 months

Photos please, this sounds so so good

Involute

Original Poster:

4 posts

As a bit of a taster of what s to come here s a couple of pics of some of the bikes I ve built over the years.
The bottom one is the HCS detail, all machined in my home workshop, prior to getting professionally involved in building bikes and making parts, mainly for the Manx GP and TT, but also WSB and BSB.
This car will not have CNC components as much as poss will be done the old school way.






Huff

3,449 posts

222 months

Oh my; with that level of ability - this is going to be orsum!
Subscribed : )