The Range Racer
Author
Discussion

Phil Dicky

7,194 posts

294 months

Sunday 6th January 2019
quotequote all
Book marked wink

charlie-5mkmt

Original Poster:

74 posts

103 months

Sunday 6th January 2019
quotequote all
Thanks again for all the supportive words, we really didn't expect this much interest!

Quick round up of our thoughts

Supercharger - agreed, working out a way of keeping this cool is going to be a priority before we start looking at chasing power.

Camber - yep there is a fair amount of bump camber as a result of the lowering. Time will tell if this is a good thing to way too much. I'm sure at some point soon we will look more carefully into exactly what the camber is when 75mm into bump.

Body panels - Interesting point, not something we have looked into yet. I'm sure there will be some big gains to be had here. The bonnet especially is hugeeeee, if we were to produce a fiberglass one, we could add some vents to help cool that engine too...:P

Our Ancestors - it's great to hear there are people before us. Makes us feel a little less insane! It really is amazing what projects found in the depths of the Internet.

Thanks again for your inputs and comments, really is helpful.

Our next step is to track down some bucket seats and bmw seat brackets. Turns out the seat bolts are the same distance apart as the e46 & e36 3 series (benefits of the range being designed during the BMW ownership days)

iguana

7,368 posts

291 months

Monday 7th January 2019
quotequote all
Got a pair of e36 base mount slider mounts, proper weichers jobbies, if you fancy.

UnluckyTimmeh

3,697 posts

244 months

Monday 7th January 2019
quotequote all
Do they already run and intercooler for the supercharger? If not possibly a retrofit with a water/gas spray for additional cooling maybe might help.

David87

7,046 posts

243 months

Monday 7th January 2019
quotequote all
Just discovered this thread and my life is now complete. Think I'm looking forward to the progress with this more than I am my holiday later this year. hehe

JP.Racing

51 posts

98 months

Monday 7th January 2019
quotequote all
What an epic project! I need to come and see this beast at some point, does it regularly reside in the 548 car park?

Biker's Nemesis

41,487 posts

239 months

Monday 7th January 2019
quotequote all
If you're going to fit a cage and Perspex windows why not lower the roof by 4 or 5 inches while you're at it.

May as well go full retard.

anonymous-user

85 months

Monday 7th January 2019
quotequote all
Notch back with race stacks smile

charlie-5mkmt

Original Poster:

74 posts

103 months

Monday 7th January 2019
quotequote all
iguana said:
Got a pair of e36 base mount slider mounts, proper weichers jobbies, if you fancy.
Thanks, ive sent you a message!

charlie-5mkmt

Original Poster:

74 posts

103 months

Monday 7th January 2019
quotequote all
JP.Racing said:
What an epic project! I need to come and see this beast at some point, does it regularly reside in the 548 car park?
Thanks! Occasionally yes, its way too expensive in fuel to commute in every day! :P

We are hoping the MPG doubles when we take some weight out wink

PugwasHDJ80

7,684 posts

252 months

Monday 7th January 2019
quotequote all
Loving this- i've always wanted to enter comp safari in standard class with something like this.

Playing devils advocate but aren't you going to have issues with using air suspension?

when it lowers the car, effectively its taking all the air out of the spring and making it nice and soft- lowering the car right down. Not ideal when you are tryin got reduce roll.

If super extend mode with the suspension jacked up you might find you have much less roll than having the suspension dropped.


charlie-5mkmt

Original Poster:

74 posts

103 months

Monday 7th January 2019
quotequote all
PugwasHDJ80 said:
Loving this- i've always wanted to enter comp safari in standard class with something like this.

Playing devils advocate but aren't you going to have issues with using air suspension?

when it lowers the car, effectively its taking all the air out of the spring and making it nice and soft- lowering the car right down. Not ideal when you are tryin got reduce roll.

If super extend mode with the suspension jacked up you might find you have much less roll than having the suspension dropped.
A good question, put simply, the opposite is true.

Very simplistically, the pressure in the spring is just force (car weight), divided area (pie * spring radius ^ 2). So doesn't significantly change between ride heights. What changes is the volume of air.

Spring rate or stiffness is a function of (Pressure / Volume) * area. So when the range racer is lower, it has similar pressure & area and less volume, so its slightly stiffer.



The reality is the affects of this are relatively small, where we really have gained stiffness is though the spring aids (called bump stops in the old days). Its affectively a 2nd spring in parallel with the air spring which gets stiffer the more you compress it. These have a gap or an amount of wheel travel towards the body before it engages (in our case, aprox 40mm).

By lowering the range racer 75mm ish, we are now well into contact with the spring aid significantly increasing our total wheel rate / stiffness (we guess we have doubled it.)


Our problems are now damping, the amount of damping should be proportional to the level of spring stiffness. We have doubled our spring stiffness and have standard damping so currently its MASSIVELY under damped, hence very bouncy!

Anyway thats future charlie, ryan & simone's problem, for now we are enjoying bouncing around with very little roll!


agent006

12,058 posts

295 months

Monday 7th January 2019
quotequote all
The higher = stuffer used to be more evident in the older P38 era air suspension. The bags and 'piston' are shaped differently in later models to help the inverse be true, so there is more flex in off road mode as it was silly stiff in the P38 at full height.

bstark

204 posts

164 months

Monday 7th January 2019
quotequote all
Love this!

Not sure if it's been mentioned but the bumpers and tow bar apparatus must weigh a chunk, and should be removable behind the aesthetic covers. They're the worst place to hang a big mass as well.

Mr-B

5,145 posts

225 months

Monday 7th January 2019
quotequote all
Bonkers!

That is an awful lot of car for the money, seems almost too nice to go tracking it. Will keep watching with interest.

Fermit and Sexy Sarah

13,240 posts

131 months

Monday 7th January 2019
quotequote all
A little nugget to save maybe 45kg?
https://www.rangerovers.net/forum/9-range-rover-sp...

I keep thinking about ideas for weight loss, I'd love to be on this project!

Sound deadening has to go.
Ditto spare wheel
Ditto tool kit
...headliner
...stereo/nav/cd changer
... passenger/ A post airbags
... engine cover
... carpets
and on and on.

Have you and your co-driver thought about the Keto diet? tongue out


Bungleaio

6,595 posts

233 months

Monday 7th January 2019
quotequote all
This is brilliant, with the right exhaust it will sound fantastic too. Fair play for doing something that really shouldn't be done.

I can't believe how cheap you picked the car up for too.

charlie-5mkmt

Original Poster:

74 posts

103 months

Wednesday 9th January 2019
quotequote all
Yesterday was a big day! We past the point of no return, we really cant go back now.

Weight stripping day one, we started from the rear of the car and worked our way forward to just behind the front seats. Quite a productive evening too, its so much quicker to take a car apart when you don't have to worry about remembering so you can put it back together.

Think we must have removed upwards of 150kg.

Things gone so far:
Tail gate trim
Spare wheel & jack etc
Infotainment ECUs and CD & DVD changers
Subwoofer & lots of speakers
Door cards, speaks and NVH foam
Rear seats
Parcel shelf
Loads of NVH foam

Whats it like? (from a short drive home at 10pm)
Its a lot more like a race car, lots of road noises & is a lot more agile! Feels significantly quicker already, most noticeable though corners, that air suspension compressor in the middle of the boot floor is very noisy when running!! Very much looking forward to driving it once more of the weight has gone.

Things left in the rear end:
Rear wiper motor & reversing camera
Door window motors
Lots of now unused wiring.
Roof lining

Next step is really to track down some bucket seats so we can start stripping the front end, we shall see what we can find.

Think we will also get a couple of buckets for the rear. Although you cant take rear passengers on track, it seems a shame to have such a big track car with only 2 seats. It will be fun to be about to go out on the road with 4 people.









snake_oil

2,039 posts

106 months

Wednesday 9th January 2019
quotequote all
cool

RC1807

13,696 posts

199 months

Wednesday 9th January 2019
quotequote all
snake_oil said:
cool
+1