Converting to Ceramic brakes on a 996t
Discussion
I know most people go the other way but I was thinking about people who may have converted to ceramic brakes on a 996t. The parts list says that the brake lines are different to the callipers and that the rear backing plates are also different.
I also know that the GT2 and turbo rotor hats are different and that you can't buy these individually. So what options do you have if the rotors are off a GT2, can you machine the hats or do you have to get new hats made? If so where can I find the specs?
Any clues or comments on the above re fitment would be appreciated.
Thanks.
I also know that the GT2 and turbo rotor hats are different and that you can't buy these individually. So what options do you have if the rotors are off a GT2, can you machine the hats or do you have to get new hats made? If so where can I find the specs?
Any clues or comments on the above re fitment would be appreciated.
Thanks.
NBTBRV8 said:
I know most people go the other way but I was thinking about people who may have converted to ceramic brakes on a 996t. The parts list says that the brake lines are different to the callipers and that the rear backing plates are also different.
I also know that the GT2 and turbo rotor hats are different and that you can't buy these individually. So what options do you have if the rotors are off a GT2, can you machine the hats or do you have to get new hats made? If so where can I find the specs?
Any clues or comments on the above re fitment would be appreciated.
Thanks.
Unless you track the car all the time then dont bother.I also know that the GT2 and turbo rotor hats are different and that you can't buy these individually. So what options do you have if the rotors are off a GT2, can you machine the hats or do you have to get new hats made? If so where can I find the specs?
Any clues or comments on the above re fitment would be appreciated.
Thanks.
Sensible upgrade would be GT3/997TT front calipers with performance friction rotors (go from 334 to 350 front rotors then). You could then put your front calipers on the rear and have bigger discs on the rear too.
Or, just start of with a different compound pad with your std set up and see if it make the difference you want.
Mr F
Would 100% agree that you do not need ceramic brakes unless you are tracking and even then not necessary.
I have had GT3 6 pots fitted on the fronts and upgraded the discs to Alcon and use Pagid pads front and back. Unbelievable stopping power and a lot cheaper to maintain over the ceramics.
I have had GT3 6 pots fitted on the fronts and upgraded the discs to Alcon and use Pagid pads front and back. Unbelievable stopping power and a lot cheaper to maintain over the ceramics.
Mr Freefall said:
Unless you track the car all the time then dont bother.
It's normally the other way round.Anyone tracking a car regularly might prefer less costly consumables - unless you are racing in top end formulae. Certainly the earlier generation PCCBs had some issues, which were substantially addressed by Gen 3, with a host of design and manufacturing improvements.
Most of the benefits are enjoyed in day-to-day road cars:
- Powerful, consistent, fade free performance from cold
- Significant unsprung weight saving - improving ride/handling
- Long life - ceramic discs estimated at 100,000 mls + in road use
- No Corrosion and, best of all, no brake dust
- Very quiet
Not cheap, although Porsche's are very good value compared with the other supercar manufacturers, but they are the best brakes you can buy for road use.
You are so wrong. I swapped my 996 turbo for a 996 turbo S and the ceramic brakes is the single biggest improvement on the whole car.
I was very cynical like you are.
The turbo is a rather heavy footed car with the 4wd system.
Reducing the unsprung weight makes the car feel so much lighter, so much more nimble.
I am not even talking about the breaking capabilities which are altogether in a different league.
Unsprung weight is the key word.
People who ride road (push) bikes can understand this better than anyone else.
Trying is believing.
My car never goes on track by the way. If I was going on the track, I would NEVER have ceramics due to the potential horendous costs if something goes wrong.
I was very cynical like you are.
The turbo is a rather heavy footed car with the 4wd system.
Reducing the unsprung weight makes the car feel so much lighter, so much more nimble.
I am not even talking about the breaking capabilities which are altogether in a different league.
Unsprung weight is the key word.
People who ride road (push) bikes can understand this better than anyone else.
Trying is believing.
My car never goes on track by the way. If I was going on the track, I would NEVER have ceramics due to the potential horendous costs if something goes wrong.
Moosh said:
Would 100% agree that you do not need ceramic brakes unless you are tracking and even then not necessary.
I have had GT3 6 pots fitted on the fronts and upgraded the discs to Alcon and use Pagid pads front and back. Unbelievable stopping power and a lot cheaper to maintain over the ceramics.
I have had GT3 6 pots fitted on the fronts and upgraded the discs to Alcon and use Pagid pads front and back. Unbelievable stopping power and a lot cheaper to maintain over the ceramics.
I should have added above that, as good as PCCBs are (and they are fantastic), I don't think it would be economic to retro-fit them to a 996.
I know 996 GT3, Turbo and GT2 owners who are very happy with their PCCBs, but it is still early technology, and the real imporovement came in 2006 with the 997 models.
I know 996 GT3, Turbo and GT2 owners who are very happy with their PCCBs, but it is still early technology, and the real imporovement came in 2006 with the 997 models.
Callughan said:
Andreas Preuninger said bar cost they are superior to steels in every way and he has them on all his cars.
Having said that the six pot steels seem to have a nicer feel without the sudden bite and cheaper to replace if tracking.
The four pots suck big time imo.
He's unlikely to say anything else about a £7k option tho is he !! Having said that the six pot steels seem to have a nicer feel without the sudden bite and cheaper to replace if tracking.
The four pots suck big time imo.
stock 996tt big reds are a bad comp to gen 1 PCCB, 6pot 350mm v 4 pot 330mm - comp a 6pot turbo with pfc or alcon discs and appropriate pads, and I'd put my money on stopping power and ability to soak up HARD use on the steelies, easily.
In all the time I've had my car on stock 4pots I've never suffered brake fade, albeit I have often wished I had more absolute stopping power.
Gen3 PCCB are 380mm and unquestionably fantastic things with little downside, on that I agree.
Edited by ZeroH on Wednesday 17th August 22:56
Sure but he did say bar cost. I'm sure the ceramics were £5.5k not that it makes a difference. It will be interesting to see how many actually spec the 4.0 with ceramic's.
I would like to have ceramics for my next car if poss, if nothing else for the brake dust and many times I have wished for more braking power in my mere C4S.
I would like to have ceramics for my next car if poss, if nothing else for the brake dust and many times I have wished for more braking power in my mere C4S.
ZeroH said:
Callughan said:
Andreas Preuninger said bar cost they are superior to steels in every way and he has them on all his cars.
Having said that the six pot steels seem to have a nicer feel without the sudden bite and cheaper to replace if tracking.
The four pots suck big time imo.
He's unlikely to say anything else about a £7k option tho is he !! Having said that the six pot steels seem to have a nicer feel without the sudden bite and cheaper to replace if tracking.
The four pots suck big time imo.
stock 996tt big reds are a bad comp to gen 1 PCCB, 6pot 350mm v 4 pot 330mm - comp a 6pot turbo with pfc or alcon discs and appropriate pads, and I'd put my money on stopping power and ability to soak up HARD use on the steelies, easily.
In all the time I've had my car on stock 4pots I've never suffered brake fade, albeit I have often wished I had more absolute stopping power.
Gen3 PCCB are 380mm and unquestionably fantastic things with little downside, on that I agree.
Edited by ZeroH on Wednesday 17th August 22:56
erics said:
You are so wrong. I swapped my 996 turbo for a 996 turbo S and the ceramic brakes is the single biggest improvement on the whole car.
I was very cynical like you are.
The turbo is a rather heavy footed car with the 4wd system.
Reducing the unsprung weight makes the car feel so much lighter, so much more nimble.
I am not even talking about the breaking capabilities which are altogether in a different league.
Unsprung weight is the key word.
People who ride road (push) bikes can understand this better than anyone else.
Trying is believing.
My car never goes on track by the way. If I was going on the track, I would NEVER have ceramics due to the potential horendous costs if something goes wrong.
^I was very cynical like you are.
The turbo is a rather heavy footed car with the 4wd system.
Reducing the unsprung weight makes the car feel so much lighter, so much more nimble.
I am not even talking about the breaking capabilities which are altogether in a different league.
Unsprung weight is the key word.
People who ride road (push) bikes can understand this better than anyone else.
Trying is believing.
My car never goes on track by the way. If I was going on the track, I would NEVER have ceramics due to the potential horendous costs if something goes wrong.
THIS . . . 100 times!
to add further to this thread, despite my car having ceramics, if i was going to track it, I would do like many gt3rs owners and gt2 owners have done: fit alcon foating discs.
If I had not discovered the huge difference ceramic brakes did to a 996 turbo, I would have gone for a 996 gt2.
In terms of 'feel', it is as if 25% of the weight of the car had been removed.
If I had not discovered the huge difference ceramic brakes did to a 996 turbo, I would have gone for a 996 gt2.
In terms of 'feel', it is as if 25% of the weight of the car had been removed.
Gassing Station | Porsche General | Top of Page | What's New | My Stuff


