Boxster 3.2s Clutch issues
Discussion
Hi all, Please help if you can? Symptoms 1st one .. quick pull away clutch peddle didn't release all the way up. (first indication there could be a problem) Few weeks later , very warm day ,took the car on a good blat and when trying to pull away at an island the car stalled. It started again easily but then kept trying to stall when clutch was released to engage drive. With handbrake on and car in gear it was evident clutch was slipping. Under load while car still very warm, revs would die off unless clutch pressed down and revs regained via accelerator. Got the car home left to cool and tried again, all then was back to normal.
Clutch now removed and looks fairly OK but going to replace anyway. Is there something else I should be looking at? Like the slave cylinder and/ or coil packs for the symptoms or is it likely that the release bearing or release plate could be the issue, so replacing the clutch should cure?
Thanks Stu
Clutch now removed and looks fairly OK but going to replace anyway. Is there something else I should be looking at? Like the slave cylinder and/ or coil packs for the symptoms or is it likely that the release bearing or release plate could be the issue, so replacing the clutch should cure?
Thanks Stu
Gassing Station | Porsche General | Top of Page | What's New | My Stuff


