GT3 Wheel colour choice again !
Discussion
sportsandclassic said:
I know we covered this before but wheels are at powder coaters and I am struggling on a colour for road wheels... any pictures or paint codes.
I may end up going black at this rate !!
Mike
Hi Mike,I may end up going black at this rate !!
Mike
You saw my gloss black wheels on my mint green 993 when you had it in for service.
I much prefer the look of the gloss black compared with the previous matt finish; I also think a metallic black will look more like a matt finish, so in my mind, not as good as a pure gloss black.
They clean up beautifully with Rimwax, and I'd certainly recommend them; as a matter of interest, Chris at ExelWheels did mine, and brilliant job all round.
Good Luck.
PS: Also think red wheels might suit your GT3.
I think that you have to be careful with black, as it suits certain coloured cars better than others. I have a second set of standard wheels now and am thinking about going black with these. I was thinking Basalt Black because of the metallic element to brighten them up, but I saw several new cars at OPC Reading a few weeks ago and changed my mind a bit.
The new factory black is flat and very glossy and looks great in the flesh (not so good in photos) I understand that this is probably paint code LO41, but I need to check this out. With a blue car, black and darkish grey/silver would probably work best. White might be a consideration, but some may feel its a bit Fast Ford or Max Power.
I also think that the whole wheel in one colour (inside and out) looks best in all colours except the factory silver, which is fine with the silver/grey finish to the interior.
Have you thought about colour coding your wheels and contrasting them with a fine 10mm silver edge?
The new factory black is flat and very glossy and looks great in the flesh (not so good in photos) I understand that this is probably paint code LO41, but I need to check this out. With a blue car, black and darkish grey/silver would probably work best. White might be a consideration, but some may feel its a bit Fast Ford or Max Power.
I also think that the whole wheel in one colour (inside and out) looks best in all colours except the factory silver, which is fine with the silver/grey finish to the interior.
Have you thought about colour coding your wheels and contrasting them with a fine 10mm silver edge?
mollytherocker said:
Your car looked best with silver wheels Mike, in fact it looked fabulous!
Anything else is just wrong. Sorry!
MTR
PS - OK maybe with the exception of gold BBS!
+1 Anything else is just wrong. Sorry!

MTR
PS - OK maybe with the exception of gold BBS!

I think it looks great with the standard silver wheels, but would like to see it with the white ones when it's put back together.
Wills2 said:
carcrazypop said:
Hi Mike,
You saw my gloss black wheels on my mint green 993 when you had it in for service.
Is that the mint green 993 from 911Virgin? You saw my gloss black wheels on my mint green 993 when you had it in for service.
If so well done it's a lovely looking car!
Thanks for that and yes it is.
It is a bit of a marmite colour, but I was looking for something completely different, and when I saw it, I really liked it with the black wheels, decals & interior.
When I bought the car, it had matt black wheels, which in my mind, looked a bit flat, so I got Chris at Exel to refurbish them in gloss black, and they look miles better.
Mechanically, the car seems to be spot on, but I'm gradually going to try & improve the car where needed; I've just had a new windscreen fitted by Shorade in Cannock, and they've also treated the surround & scuttle to prevent the dreaded rust in the future.
I had a 996t before, and was slightly nervous about changing, but I now have no regrets at all.
based on my research, you should be painting your wheels esp if you want gloss black. porsche paints their wheels. i will be going this route over powder coating which requires a lot of heat to bake it in and can't replicate that high gloss paint finish.
i've also noticed that powder coated finishes dull over a not so extended amount of time.
i've also noticed that powder coated finishes dull over a not so extended amount of time.
ROK said:
based on my research, you should be painting your wheels esp if you want gloss black. porsche paints their wheels. i will be going this route over powder coating which requires a lot of heat to bake it in and can't replicate that high gloss paint finish.
i've also noticed that powder coated finishes dull over a not so extended amount of time.
Hi,i've also noticed that powder coated finishes dull over a not so extended amount of time.
Powder coating last longer and it does not fade over time in my experience.. Seen wheels that were done 4years ago and still good.
The brake dust oes not attack the powder coat the same as a painted wheel.
Mike
Gassing Station | Porsche General | Top of Page | What's New | My Stuff




