Will 19" 997 Carrera Classics fit a 996 C4S?
Will 19" 997 Carrera Classics fit a 996 C4S?
Author
Discussion

RoadRaider

Original Poster:

102 posts

193 months

Monday 29th August 2011
quotequote all
Hi there
I've searched the posts and came up with nothing. This is a technical question not a style question; any advice?
I'm particularly keen to know what the offset/spacer needs are - if any.
Cheers

6C4GTS

5,186 posts

209 months

Monday 29th August 2011
quotequote all
Use this
Your current offset is stamped on the OE wheels next to the valve.

RoadRaider

Original Poster:

102 posts

193 months

Monday 29th August 2011
quotequote all
Thanks, will go take a look!

RoadRaider

Original Poster:

102 posts

193 months

Monday 29th August 2011
quotequote all
My C4S are 18"
8/50 front
11/45 rear

Wheels I am interested in are 19"
8/57 and 11/67

Any help much appreciated.
Cheers

6C4GTS

5,186 posts

209 months

Monday 29th August 2011
quotequote all
Front wheel will sit 7mm further into car - 7mm spacer will bring it back out!
Rear wheel will sit 22mm further into car - 22mm spacer will bring it back out!

Get some advice on spacers before you do this - as if the are not prefectly made and fitted you can seriously affect the car.

HTH

cool

RoadRaider

Original Poster:

102 posts

193 months

Monday 29th August 2011
quotequote all
Thanks, this is very helpful. Think I'll just stick to the 18" and cut out the risks.
I hadn't fully appreciated the technical elements.
I've bought a '03 C4S, the car is mechanically sound/solid but kerbed badly; the alloys are shot.
A refurb looks pointless, so looking to replace with some good 2nds; the 997's looked kind of right.

Any suggestions very welcome; I think any 996 Turbo wheel is a fit?



6C4GTS

5,186 posts

209 months

Monday 29th August 2011
quotequote all
C4S and turbo wheels are interchangeable - later turbos come with lighter hollow spoke wheels which are preferable if you can find them.

Usually a few sets on ebay.

Are you sure the wheels are beyond a refurb as that is by far the easiest way.
Take some phots and post them up - there are guys (Chris?) who do refurbs and come recommended.

gilbo

460 posts

231 months

Monday 29th August 2011
quotequote all
I have 19" x 8&11 997 Carrera S alloys on my narrow bodied 996 Carrera 2 and there is no fouling issues at all. I am possibly looking to sell them though and get BBS LM's

6C4GTS

5,186 posts

209 months

Monday 29th August 2011
quotequote all
gilbo said:
narrow bodied 996 Carrera 2
Same as above - these would need spacers on a wide body car.

RoadRaider

Original Poster:

102 posts

193 months

Monday 29th August 2011
quotequote all
Here 1 of 4

RoadRaider

Original Poster:

102 posts

193 months

Monday 29th August 2011
quotequote all
Here is 2 of 4

RoadRaider

Original Poster:

102 posts

193 months

Monday 29th August 2011
quotequote all
Here is 3 of 4

RoadRaider

Original Poster:

102 posts

193 months

Monday 29th August 2011
quotequote all
..the best until last, 4 of 4. Apparently a certain OPC thought it was ok to drive on this tyre...you'll be pleased to here I didn't take that advice.

RoadRaider

Original Poster:

102 posts

193 months

Monday 29th August 2011
quotequote all
Incidentally, bought the car 'as-is', my spatial awareness is not (yet) this bad!

thegoose

8,077 posts

241 months

Tuesday 30th August 2011
quotequote all
That tyre does look OK to drive on (if not pretty) as it's only the rim protector that's damaged, which is what it's there for (think of it as sacrificial).

The wheels can certainly be refurbished no problem - budget up to £300 all in for a proper strip down job.

6C4GTS

5,186 posts

209 months

Tuesday 30th August 2011
quotequote all
I would get these refurbed - keeps OE look and handling and its a cheaper option too.