996 GT3 Gearbox update
Discussion
Hi,
Just a quick update for all those interested:

Removed from car and ready for strip.

Gear set.

Top cover removed and diff out.

Gear stack removed for stripping.

Stripped down.

Inside diff housing.

Mainshaft stripped down.

One of the main bearings, this is very small for its loading and does wear out quickly.

New 3rd/4th gear motorsport metal synchro rings.

Setting tooling up for measurment.

Taking a pinion shaft height measurment.

Old plates removed and new motorsport pack ready for installation.


Warming crownwheel to refit on diff carrier.

Almost finished with it !
Mike
Just a quick update for all those interested:
Removed from car and ready for strip.
Gear set.
Top cover removed and diff out.
Gear stack removed for stripping.
Stripped down.
Inside diff housing.
Mainshaft stripped down.
One of the main bearings, this is very small for its loading and does wear out quickly.
New 3rd/4th gear motorsport metal synchro rings.
Setting tooling up for measurment.
Taking a pinion shaft height measurment.
Old plates removed and new motorsport pack ready for installation.
Warming crownwheel to refit on diff carrier.
Almost finished with it !
Mike
Edited by sportsandclassic on Wednesday 31st August 18:10
keep it lit said:
Hi Mike,
Looks like familiar work mate...
What condition is your box in compared to mine you recon'd a few months back then mate...?
Ade
Far better ! Looks like familiar work mate...
What condition is your box in compared to mine you recon'd a few months back then mate...?
Ade
Although I was told when I bought mine it had a motorsport diff pack fitted, Well it did not and it was built incorrectly to start with..
Mike
Hi,
Lost all track of cost... The words cost and gt3 don't go together very well!
I have got gt3 cup gear cables and 2010gt3 rs shifter to install along with 964rs single mass flywheel and light weight front pulley.
Along with all my suspension mods it will be a while before she rides again...
Mike
Lost all track of cost... The words cost and gt3 don't go together very well!
I have got gt3 cup gear cables and 2010gt3 rs shifter to install along with 964rs single mass flywheel and light weight front pulley.
Along with all my suspension mods it will be a while before she rides again...

Mike
Getting there huh. You having fun?
You're going to love the diff with those plates. The non motorsport ones are terrible. I bet most GT3 owners are driving round with diffs that aren't doing anything at all anymore.
Any thoughts on what oil your going to use. If your feeling adventurous the mobil delvac is wonderful stuff in that box.
You're going to love the diff with those plates. The non motorsport ones are terrible. I bet most GT3 owners are driving round with diffs that aren't doing anything at all anymore.
Any thoughts on what oil your going to use. If your feeling adventurous the mobil delvac is wonderful stuff in that box.
fioran0 said:
Getting there huh. You having fun?
You're going to love the diff with those plates. The non motorsport ones are terrible. I bet most GT3 owners are driving round with diffs that aren't doing anything at all anymore.
Any thoughts on what oil your going to use. If your feeling adventurous the mobil delvac is wonderful stuff in that box.
Hi, Fun... maybe not! We have fitted dozens of those diff plates and they are amazing in the GT cars. I was under the impression mine had one already fitted, but it did not. Diff was working when I bought the car and it had good break off torque. As for the oil was going to use Mobil 1 75/90 PTX.
Mike
You're going to love the diff with those plates. The non motorsport ones are terrible. I bet most GT3 owners are driving round with diffs that aren't doing anything at all anymore.
Any thoughts on what oil your going to use. If your feeling adventurous the mobil delvac is wonderful stuff in that box.
Hi, Fun... maybe not! We have fitted dozens of those diff plates and they are amazing in the GT cars. I was under the impression mine had one already fitted, but it did not. Diff was working when I bought the car and it had good break off torque. As for the oil was going to use Mobil 1 75/90 PTX.
Mike
fioran0 said:
Getting there huh. You having fun?
You're going to love the diff with those plates. The non motorsport ones are terrible. I bet most GT3 owners are driving round with diffs that aren't doing anything at all anymore.
Any thoughts on what oil your going to use. If your feeling adventurous the mobil delvac is wonderful stuff in that box.
But for a road going car with otherwise perfect chassis and geo settings how will the lack of preload in the diff manifest itself on the road ? I ask as any 911 will have inherently good traction, I suspect a large amount of the diffs work in these cars actually occurs under throttle off, braking conditions whereby the preload makes the car more stable ?You're going to love the diff with those plates. The non motorsport ones are terrible. I bet most GT3 owners are driving round with diffs that aren't doing anything at all anymore.
Any thoughts on what oil your going to use. If your feeling adventurous the mobil delvac is wonderful stuff in that box.
Slippydiff said:
But for a road going car with otherwise perfect chassis and geo settings how will the lack of preload in the diff manifest itself on the road ? I ask as any 911 will have inherently good traction, I suspect a large amount of the diffs work in these cars actually occurs under throttle off, braking conditions whereby the preload makes the car more stable ?
Hi,As you say regarding road cars and diff operation, you can notice a slight difference in the way the car puts the power down also you can suffer uneven tyre wear, main advantage as you state does come from braking it keeps the back end pinned down rather than squirming around which mine started to do on the road.
From my limited experience with gearboxes, I would say that a road car driven propely a standard diff pack would last you around 15000 miles and it would need adjustment. 2 track days if lucky would see it off as it works a lot harder. Mine was set at 55NM preloading when I got my car, it had less than 15NM when I stripped it.... 3500 road miles and 400 +/- track miles. I thought it strange as I thought it was upgraded (so did previous owner) and examined the diff plates....well suprise it was on standard plates. So in went new motor sport diff pack.
As for cost's involved it really does depend on whats wrong...if that main beairng collapses which they all will do, you need a new beairng carrier and it costs £200.00 for the carrier throw in £1400 more beairngs and £1200 worth of synchro rings plus £900 labour to do the rebuild it soon adds up.
On average they can cost £1500 to £X
Mike
slippy,
i was referring purely to the fact that the regular plates wear out pretty quickly and most end up so bad in a relatively short time (couple of years if that) that the diff cant do anything at all anymore and is essentially just open all the time. it wasnt a comment on preload or splits etc.
for most with a 996 who havent had a diff rebuild they are almost certain to just have an LSD that is essentially not there due to wear. regular road use is enough to do this, it doesnt need to have a track life. tracking will kill the road plates in a scarily short space of time though from what ive seen.
diffs seem to be one of those things for many drivers that it takes having it working again for them to realise just how long it hasnt been if that makes sense.
avoiding all the on track benefits that i readily accept dont apply for many, just having a diff that cant function will still impact the car on the road imho. general grip and handling , wet weather driving, anytime road surface isnt optimal will all be areas where an operational diff would still be helpful under daily driving. it would also be handy if you felt the need to give it beans or brake hard on the motroway
the clutch plates all wear down and need routine maintenance, even the motorsport ones, its just function of their operation but it seems often overlooked.
i was referring purely to the fact that the regular plates wear out pretty quickly and most end up so bad in a relatively short time (couple of years if that) that the diff cant do anything at all anymore and is essentially just open all the time. it wasnt a comment on preload or splits etc.
for most with a 996 who havent had a diff rebuild they are almost certain to just have an LSD that is essentially not there due to wear. regular road use is enough to do this, it doesnt need to have a track life. tracking will kill the road plates in a scarily short space of time though from what ive seen.
diffs seem to be one of those things for many drivers that it takes having it working again for them to realise just how long it hasnt been if that makes sense.
avoiding all the on track benefits that i readily accept dont apply for many, just having a diff that cant function will still impact the car on the road imho. general grip and handling , wet weather driving, anytime road surface isnt optimal will all be areas where an operational diff would still be helpful under daily driving. it would also be handy if you felt the need to give it beans or brake hard on the motroway

the clutch plates all wear down and need routine maintenance, even the motorsport ones, its just function of their operation but it seems often overlooked.
fioran0 said:
slippy,
i was referring purely to the fact that the regular plates wear out pretty quickly and most end up so bad in a relatively short time (couple of years if that) that the diff cant do anything at all anymore and is essentially just open all the time. it wasnt a comment on preload or splits etc.
for most with a 996 who havent had a diff rebuild they are almost certain to just have an LSD that is essentially not there due to wear. regular road use is enough to do this, it doesnt need to have a track life. tracking will kill the road plates in a scarily short space of time though from what ive seen.
diffs seem to be one of those things for many drivers that it takes having it working again for them to realise just how long it hasnt been if that makes sense.
avoiding all the on track benefits that i readily accept dont apply for many, just having a diff that cant function will still impact the car on the road imho. general grip and handling , wet weather driving, anytime road surface isnt optimal will all be areas where an operational diff would still be helpful under daily driving. it would also be handy if you felt the need to give it beans or brake hard on the motroway
the clutch plates all wear down and need routine maintenance, even the motorsport ones, its just function of their operation but it seems often overlooked.
I agree wholeheartedly with your comments F. I guess what I'm asking is how one would know the diff isn't functioning as it was intended ? Does the car become noticeably more unstable under braking ? and for example is traction when pulling out of side road in the wet noticeably compromised ?i was referring purely to the fact that the regular plates wear out pretty quickly and most end up so bad in a relatively short time (couple of years if that) that the diff cant do anything at all anymore and is essentially just open all the time. it wasnt a comment on preload or splits etc.
for most with a 996 who havent had a diff rebuild they are almost certain to just have an LSD that is essentially not there due to wear. regular road use is enough to do this, it doesnt need to have a track life. tracking will kill the road plates in a scarily short space of time though from what ive seen.
diffs seem to be one of those things for many drivers that it takes having it working again for them to realise just how long it hasnt been if that makes sense.
avoiding all the on track benefits that i readily accept dont apply for many, just having a diff that cant function will still impact the car on the road imho. general grip and handling , wet weather driving, anytime road surface isnt optimal will all be areas where an operational diff would still be helpful under daily driving. it would also be handy if you felt the need to give it beans or brake hard on the motroway

the clutch plates all wear down and need routine maintenance, even the motorsport ones, its just function of their operation but it seems often overlooked.
cragswinter said:
Would be god to have a basic cost of the job though mike-even if it was based on ades job.
A lot of these cars have had some serious track use & it would be great for owners to have an idea of what things may cost if they need to go down the rebuild route.
I went for the lot;A lot of these cars have had some serious track use & it would be great for owners to have an idea of what things may cost if they need to go down the rebuild route.
Cup crownwheel & pinion 8:32 kit
Cup cables
Cup steel syncros 2/3/4th gears
Cup diff pack
997.2 steel mech shifter
All new bearings where needed
Replacement 1st gear
Millers fully synthetic race 75-90 gear oil
Cost £4-5k.. inc full stripdown inspection report & rebuild labour with Mike at S&C.
Credit to Mike as the box has transformed the car on track. Traction from the diff is incredible, both braking into and exiting corners at speed is fantastic. The lower final drive also brings fifth gear into use for example at Donington & Oulton which makes things exciting! Using the latest generation shifter combined with the solid cup cables & steel synchros, makes the gearshift ultra fast & precise..
Next..extra power.
Ade
sportsandclassic said:
I thought it strange as I thought it was upgraded (so did previous owner) and examined the diff plates....well suprise it was on standard plates. So in went new motor sport diff pack.
the previous owner didn't advertise the car as having a motorsport diff or cup plates but he had the diff refurbished by fearnsport at a cost of around £600 just a few months before selling the car.how worn were the original diff plates?
fearnsport say that the original shims don't usually provide enough friction between the plates and they don't wear. fearnsport's solution is to fit larger shims.
agtlaw said:
the previous owner didn't advertise the car as having a motorsport diff or cup plates but he had the diff refurbished by fearnsport at a cost of around £600 just a few months before selling the car.
how worn were the original diff plates?
fearnsport say that the original shims don't usually provide enough friction between the plates and they don't wear. fearnsport's solution is to fit larger shims.
The car WAS advertised with a rebuilt diff containing cup plates.... just checked the advert. Not that I am looking for anything from previous owner. how worn were the original diff plates?
fearnsport say that the original shims don't usually provide enough friction between the plates and they don't wear. fearnsport's solution is to fit larger shims.
Original plates were worn a fair amount and they quickly diminshed over a few track days and road miles.
Only way forward is Cup plates.
Mike
looks good Mike,
i fitted cup pack to mine last year, makes the car much more controllable in the wet. Drift machine
understeers a bit more when tyres are cold on roundabouts etc, once heated up they are fine.
You would be doing well to wear the cup plate back to the OE plate torque too!
i fitted cup pack to mine last year, makes the car much more controllable in the wet. Drift machine

understeers a bit more when tyres are cold on roundabouts etc, once heated up they are fine.
You would be doing well to wear the cup plate back to the OE plate torque too!
Gassing Station | Porsche General | Top of Page | What's New | My Stuff


