Discussion
Design 911 show the alternator (it's a TIP specific one) at £660 including VAT - a surcharge of £150 is refunded when the old one is returned, so it's reasonable to assume that an Indie would charge about £500 for the part plus their labour (about 2-3 hours I think)
As for getting the job done, I would call Cridfords of Surrey or RSJ as they're both in your area.
Good Luck
As for getting the job done, I would call Cridfords of Surrey or RSJ as they're both in your area.
Good Luck

STiG911 said:
Design 911 show the alternator (it's a TIP specific one) at £660 including VAT - a surcharge of £150 is refunded when the old one is returned, so it's reasonable to assume that an Indie would charge about £500 for the part plus their labour (about 2-3 hours I think)
As for getting the job done, I would call Cridfords of Surrey or RSJ as they're both in your area.
Good Luck
CheersAs for getting the job done, I would call Cridfords of Surrey or RSJ as they're both in your area.
Good Luck

RICK69 said:
I don't want to get raped by an OPC & I don't know that a reputable indie existed.
I can understand your reluctance to go the OPC route. There are a good number of independant specialists, many of whom get positively endorsed on here.
So, going back to your original post, you ask how much it's going to cost..........with who doing the work? Not an OPC and you don't seem keen on the indie route???
The figures mentioned earlier are pretty accurate.
I would have thought that 2-3 hours is quite adequate. It's a pretty easy DIY job too, if you fancy getting your hands dirty.
Nobby Diesel said:
I can understand your reluctance to go the OPC route.
There are a good number of independant specialists, many of whom get positively endorsed on here.
So, going back to your original post, you ask how much it's going to cost..........with who doing the work? Not an OPC and you don't seem keen on the indie route???
The figures mentioned earlier are pretty accurate.
I would have thought that 2-3 hours is quite adequate. It's a pretty easy DIY job too, if you fancy getting your hands dirty.
Cheers.I never get my hands dirty & if I start messing around with it would cost me twice as much to put right.There are a good number of independant specialists, many of whom get positively endorsed on here.
So, going back to your original post, you ask how much it's going to cost..........with who doing the work? Not an OPC and you don't seem keen on the indie route???
The figures mentioned earlier are pretty accurate.
I would have thought that 2-3 hours is quite adequate. It's a pretty easy DIY job too, if you fancy getting your hands dirty.
The above figures seem right.I find if you go to a so-called Porsche Indie they screw you as well but not as much as an OPC.
I think I will just go to back street garage who has worked on Porches & seems to know what they are talking about.
I don't understand the reluctance to use a reputable indy, there is such a thing. I am not saying they're all good (why would they, there are exceptions everywhere) but maybe you want to give one a chance by asking if anyone know a good / cost effective one where you are ? It might work out much cheaper than rely on someone who may not have that much experience working on modern Porsches.
Gassing Station | Porsche General | Top of Page | What's New | My Stuff


