996 GT3 DME data
Discussion
Earlier 996's only stored engine 'over rev' ranges (Range 1 - Rev limit, Range 2 - over Rev limit), later cars were expanded to 6 ranges (covered indetail on PH - search function will clear any questions). For me to get a warranty on that vehicle for you (after 90 days and assuming it is within the age / mileage framework) I would have to speak to PCGB technical department for a consideration; the technical department would want to see:
Pictures of the oil filter and housing (for signs of debris / bearing damage)
Cylinder leakage test results
Engine compression test results
A complete vehicle analysis log (VAL)
I would also need to submit a statement outlining that the engine is running well and with no outward signs of damage.
The fact the engine hasn't covered 50hrs since the last 'Range 2' incident may affect the consideration also. Big bargaining point or leap of faith..............
Pictures of the oil filter and housing (for signs of debris / bearing damage)
Cylinder leakage test results
Engine compression test results
A complete vehicle analysis log (VAL)
I would also need to submit a statement outlining that the engine is running well and with no outward signs of damage.
The fact the engine hasn't covered 50hrs since the last 'Range 2' incident may affect the consideration also. Big bargaining point or leap of faith..............
its a few seconds of rev range 2 so in reality something that I would not be too concerned at. The GT3 engine is very strong, cup engines regularly over rev to 10k and stay together. i'd spend more time establishing the provenance of the car and making sure its not had heavy damage than a few seconds of rev range 2 to b honest.
Steve Rance said:
its a few seconds of rev range 2 so in reality something that I would not be too concerned at. The GT3 engine is very strong, cup engines regularly over rev to 10k and stay together. i'd spend more time establishing the provenance of the car and making sure its not had heavy damage than a few seconds of rev range 2 to b honest.
^^Agree274 ignitions is ~0.6 of a second
Thats how it happens but at less than a second, the driver clearly was quick minded, dipped the clutch and prevented any real risk of damage. i really wouldn't be worried about it. The strongest part of a GT3 is the engine. Its a lot easier for an idiot driver to damage the gearbox and the rest of the drive train.
Pope said:
Earlier 996's only stored engine 'over rev' ranges (Range 1 - Rev limit, Range 2 - over Rev limit),.
this quoted bit is not quite right. the rev limit is 8200 rpm. range 1 is 8200-8800rpm. range 2 is anything exceeding 600 rpm over the rev limiter. i.e. anything over 8800 rpm with "possible engine damage" according to porsche. good call on the testing that can be done. thanks for the info. Gassing Station | Porsche General | Top of Page | What's New | My Stuff


