Fitting new starter motor on s2 - help!
Discussion
Hi,
I'm just fitting a new Lucas starter motor onto my 944 S2 - the old one's been off a little while... This may be a long shot but has anyone any pics that might help me with which way round the cables go back on?? Stupidly have forgotten (obviously don't want to get them on the wrong way round).
Many thanks in anticipation.
I'm just fitting a new Lucas starter motor onto my 944 S2 - the old one's been off a little while... This may be a long shot but has anyone any pics that might help me with which way round the cables go back on?? Stupidly have forgotten (obviously don't want to get them on the wrong way round).
Many thanks in anticipation.
Have a look here: http://clarks-garage.com/ - under 'garage shop manual' - starter motor, there's a couple of pics there which may help.
Sandy59 said:
From a 968 drawing I've looked at - I think it's the same as an S2 - it appears 3 x black wires are connected together at the motor, with a smaller second red/black wire connected to another terminal, does that tie in ??
Wire them up before you put it in if you are unsure. The pinion will only fly out if the shaft turns the correct way. I reckon. Gassing Station | Porsche General | Top of Page | What's New | My Stuff


