986 headlight mods
986 headlight mods
Author
Discussion

Decky_Q

Original Poster:

2,109 posts

208 months

Sunday 18th September 2011
quotequote all
I love the shape of the older 911 and in particular the round headlights (I detest the 986 shape headlights!), and that's the look I want to recreate, but, on a budget.

I have been reading the porsche forum for a while and can see that many here are very much against modifying vehicles from OE but I thought Id get a few experienced owners input anyway.

The plan is to get a 986 for around £5-6k, a zeintop, and some MINI headlights

Has anyone tried fitting MINI headlights and welding/filling in the bodywork around it? anyone heard of someone trying it or something similar?
I hate the look of the light covers out there so they are not an option at all. I have done some bodywork on hatchbacks before, deleting handles, body recesses etc so should be do-able on my budget.

Edited by Decky_Q on Sunday 18th September 22:40

thegoose

8,077 posts

241 months

Monday 19th September 2011
quotequote all
Besides the matter of taste it will be technically VERY difficult using the original wings - the wings end above the headlight, which is secured to the panel under the wing, so unless you go down the 9x7 panel route you will basically be fabricating the whole front of the wings (good luck trying to make that not look like a bad kit car rolleyes ), which will be more costly than the 9x7 panel route (£3k?). Mini lights will be too vertical too I think.

Henry-F

4,791 posts

276 months

Monday 19th September 2011
quotequote all
The work you want to do is going to be quite extensive, certainly not some magic swap out. As with all customisations a lot of work for quite subtle gain and not everyone will appreciate all your hard work so re-sale could be affected.

Be aware that the 986 and 987 hard tops are different so you won't be able to just slap the custom hardtop on. That will involve quite a lot of work as well.

My own thoughts? By the time you've got everything sorted out you probably could have gone out and bought a cheap 987 to begin with.

Henry smile

jkh112

23,948 posts

189 months

Monday 19th September 2011
quotequote all
Another way is to fit one of the 997 facelift kits meant for a 996.

Roberty

1,180 posts

203 months

Monday 19th September 2011
quotequote all
If you do not like the look of the 986 do yourself a favour and don't buy one.

A £5-6K 986 is likely to need money spending on it in some more important areas than the headlights.

The route your suggesting is going to lead to expense and dissappointment.

Plus who is ever going to buy this mongrel off you once you've finished with it or given up on the idea?

300bhp/ton

41,030 posts

221 months

Monday 19th September 2011
quotequote all
Decky_Q said:
I love the shape of the older 911 and in particular the round headlights (I detest the 986 shape headlights!), and that's the look I want to recreate, but, on a budget.

I have been reading the porsche forum for a while and can see that many here are very much against modifying vehicles from OE but I thought Id get a few experienced owners input anyway.

The plan is to get a 986 for around £5-6k, a zeintop, and some MINI headlights

Has anyone tried fitting MINI headlights and welding/filling in the bodywork around it? anyone heard of someone trying it or something similar?
I hate the look of the light covers out there so they are not an option at all. I have done some bodywork on hatchbacks before, deleting handles, body recesses etc so should be do-able on my budget.

Edited by Decky_Q on Sunday 18th September 22:40
Wow sounds like a humongous amount of work (and cost) for such little gain.

I can't believe the 996 headlights are that offensive, I mean FFS you can only see them truly from looking at the front of the car, no other angle.

Decky_Q

Original Poster:

2,109 posts

208 months

Wednesday 21st September 2011
quotequote all
cheers for advice guys