heated wing mirror glass failure
Discussion
Anyone replaced/fixed a failed heated door mirror glass on a 9X6?
Do you have to buy a new glass? How easy to fit yourself?
I might assume that it isn't a fuse problem as only one of them isn't heating (and the motorised functions still work) so presumably it's just the heating element, or possibly a dry connector.
Do you have to buy a new glass? How easy to fit yourself?
I might assume that it isn't a fuse problem as only one of them isn't heating (and the motorised functions still work) so presumably it's just the heating element, or possibly a dry connector.
Edited by MogulBoy on Thursday 1st December 10:08
Check the pins in the plug connection first..........
Prise out the mirror trim from the window corner (door panel edge first, then once the clips are unclipped push the trim upwards to get it off its locator guide at the very top - don't pull it off you'll break the guide). The plug connection is then visible. Check for correct fit and contact corrosion - a common fault due to water ingress.
HTH
Prise out the mirror trim from the window corner (door panel edge first, then once the clips are unclipped push the trim upwards to get it off its locator guide at the very top - don't pull it off you'll break the guide). The plug connection is then visible. Check for correct fit and contact corrosion - a common fault due to water ingress.
HTH
Gassing Station | Porsche General | Top of Page | What's New | My Stuff


