993 Headlamp problem.

[tonycordon]

I have a problem with one of my 993's headlights. This evening I noticed that the dipped beam had failed on the offside light. Ok I thought, new bulb. Removed the lamp and its hatch to find the bulb loosely in place but the spring wire bulb retaining clip was missing, the bulb was not blown, but was not connecting to earth. I shook the light unit and something could be heard rattling about in the depths, I assume it’s the clip. Looking at the light unit it seems to be made in two main parts, held together by 5 plastic ‘clips’. If I prise these clips open can I separate the two halves and, hopefully find the missing clip? Is there anything that I should be aware of? I also noticed that the cast metal housing onto which the missing clip is meant to locate looks a bit distorted, is this a known issue? I’m reluctant to leave the clip ‘floating about inside the housing, but if I can’t recover it does anyone know from where a replacement could be obtained?

[huytonman]

You can separate the unit, I did this to fit new lenses so don't worry and yes the cast clip on mine didn't look right but fiddle with it and it's fine - all is normal!

[Pickled Piper]

Hi Yes, you can remove the headlamp lense by prising the plastic clips away.

The deformed bulb holder is a known issue. There is an upgraded bit that is not expensive and available from Porsche dealers. Have a look on 911uk.com and you will be able to find the exact part number. Your Porsche dealer should be able to find it anyway.

pp

[m030]

Part nr 000.043.204.28

[tonycordon]

Thanks to all for the replies and advice. I took the assembly apart by releasing the clips and recovered the clip. I have ordered one of ToreB's HID kits and will report.................