HOW TO BREAK INTO A 996
Discussion
I now it sounds ominous but it is my car. I tried to open the car with the key fob but it wouldn't work so I put the key in the door for it to turn and turn but not unlock. Had a quick search on tinternet and it could be a bar behind the lock barrel that turns with the lock could of sheared off (a known weakness) but the central locking also becomes deactivated so the key fob is redundant. Seems I'm f*cked only thing I can think is to smash a window, but I was hoping someone knowledgeable on here could suggest something less drastic.
skidpan said:
I now it sounds ominous but it is my car. I tried to open the car with the key fob but it wouldn't work so I put the key in the door for it to turn and turn but not unlock. Had a quick search on tinternet and it could be a bar behind the lock barrel that turns with the lock could of sheared off (a known weakness) but the central locking also becomes deactivated so the key fob is redundant. Seems I'm f*cked only thing I can think is to smash a window, but I was hoping someone knowledgeable on here could suggest something less drastic.
It is not hard to break in the car. Any tow truck operator worthy of his job can do this. He has a set of "tools" that make it rather easy.On a similar topic, but off topic to the OP. I unfortunately locked my house and car keys into my Audi A6 Avant, simple error. RAC came out and he could not open the doors due to the deadlocking and gave me the option... he either fishes around and snips a wire which could potentially be the wrong wire or he smashes the window.
I opted for the window to go in, then had to clamber through the open space as the dead locks were on... keys found, doors open... magic.
If you do opt to put the window in, the best advise is to get a load of gaffer tape and cover the window to prevent as much glass as possible going into the cabin. it also helps with removal of the glass. A small tap to the corner of the glass should do it, then follow it around. Much safer way of doing things.
Good luck.
I opted for the window to go in, then had to clamber through the open space as the dead locks were on... keys found, doors open... magic.
If you do opt to put the window in, the best advise is to get a load of gaffer tape and cover the window to prevent as much glass as possible going into the cabin. it also helps with removal of the glass. A small tap to the corner of the glass should do it, then follow it around. Much safer way of doing things.
Good luck.
Gassing Station | Porsche General | Top of Page | What's New | My Stuff



