A Cayman for the track :-)
Discussion
As the other thread goes way off topic and people want to win at track days etc I stopped looking at it once that happened.
I'll show you a nice Cayman build which would be a hoot on track.
these builds in the USA are looking real sweet.
I doubt the GT3 boys will like it much and some thing will be wrong with it though, but for the rest of use enjoy this one.

spec
Suspension
- Porsche Motorsport Cup Car 2-piece Forged Control arms ( Grand am Spec )
- Porsche Motorsport Cup Car Front Tie Rod Kit
- Porsche Motorsport Cup Car Rear Toe Kit
- Champion Motorsport Front Trailing Arm Kit
- RSS Rear Toe Locking Plates
- Tarett Bladed Front Sway Bar with Adjustable Drop Links
- Tarett Bladed Rear Sway bar with Adjustable Drop links and in cabin adjustability
- MCS 3-Way Coilovers with 750-800 spring Setup
Drivetrain
Numeric Racing Short Shifter
Numeric Racing Shift Risers
OS Giken LSD
Aasco Lightweight Aluminum Flywheel
Sachs Sport Clutch and Pressure Plate
RSS clutch Stop
RRMS Remote Clutch Bleeder
Wevo Transmission Mounts
Engine
Porsche 3.8L Motor
EVOMSit Software ( 98 oct file )
IPD Competition Plenum
Porsche GT3/RS Throttle Body ( 82 mm )
Custom 3.5 inch cold air intake
Wevo Motor Mount
A/C Delete
Power Steering Removal
BBI Lightweight Crank pulley
RRMS / Lucas Fab Long Tube Race Headers
RRMS/ Lucas Fab Race Exhaust
OEM Porsche Center Radiator Kit
Safety
1 3/4 inch Custom Roll Cage ( Chromoly )
Schroth 6 Point Race Harness
Roll Bar padding
OMP RSPT Race Seat
OMP Sliders
Planted Seat Brackets
Electronics
Motec CDL-3 Track Kit with Data Logging
Electronic Cut off Switch ( Interior and Exterior )
Fuse Panel in cabin for all accessory power
Carbon Dash panel for all Switches
Racing Radios Communication Kit
Sabelt Fire System
Brakes
Pagid RS29 Brake Pads ( Front and Rear)
StopTech Trophy Race BBK Kit ( 380 front / 345mm Rear )
997S Front Uprights to allow for 380mm StopTech Kit / 6 Piston Calipers
OEM Porsche GT3 Master Cylinder
Motul RBF 660 Fluid
Rebel Rock MS Duct Cooling Kit
Steering
Porsche Motorsport Cup Electronic Powersteering Pump with OEM lines and Fittings
OMP 330mm Steering Wheel
OMP Quick Release Hub
Wheels
CCW C10's powder coated Guards Red
Aerodynamics
Porsche Motorsports 997.1 Cup Car front Bumper
Porsche OEM 997 Front Fenders
Porsche OEM 997 Hood with Motorsports Naca duct
Interseries Rear Decklid with 996 Cup Wing


I'll show you a nice Cayman build which would be a hoot on track.
these builds in the USA are looking real sweet.
I doubt the GT3 boys will like it much and some thing will be wrong with it though, but for the rest of use enjoy this one.

spec
Suspension
- Porsche Motorsport Cup Car 2-piece Forged Control arms ( Grand am Spec )
- Porsche Motorsport Cup Car Front Tie Rod Kit
- Porsche Motorsport Cup Car Rear Toe Kit
- Champion Motorsport Front Trailing Arm Kit
- RSS Rear Toe Locking Plates
- Tarett Bladed Front Sway Bar with Adjustable Drop Links
- Tarett Bladed Rear Sway bar with Adjustable Drop links and in cabin adjustability
- MCS 3-Way Coilovers with 750-800 spring Setup
Drivetrain
Numeric Racing Short Shifter
Numeric Racing Shift Risers
OS Giken LSD
Aasco Lightweight Aluminum Flywheel
Sachs Sport Clutch and Pressure Plate
RSS clutch Stop
RRMS Remote Clutch Bleeder
Wevo Transmission Mounts
Engine
Porsche 3.8L Motor
EVOMSit Software ( 98 oct file )
IPD Competition Plenum
Porsche GT3/RS Throttle Body ( 82 mm )
Custom 3.5 inch cold air intake
Wevo Motor Mount
A/C Delete
Power Steering Removal
BBI Lightweight Crank pulley
RRMS / Lucas Fab Long Tube Race Headers
RRMS/ Lucas Fab Race Exhaust
OEM Porsche Center Radiator Kit
Safety
1 3/4 inch Custom Roll Cage ( Chromoly )
Schroth 6 Point Race Harness
Roll Bar padding
OMP RSPT Race Seat
OMP Sliders
Planted Seat Brackets
Electronics
Motec CDL-3 Track Kit with Data Logging
Electronic Cut off Switch ( Interior and Exterior )
Fuse Panel in cabin for all accessory power
Carbon Dash panel for all Switches
Racing Radios Communication Kit
Sabelt Fire System
Brakes
Pagid RS29 Brake Pads ( Front and Rear)
StopTech Trophy Race BBK Kit ( 380 front / 345mm Rear )
997S Front Uprights to allow for 380mm StopTech Kit / 6 Piston Calipers
OEM Porsche GT3 Master Cylinder
Motul RBF 660 Fluid
Rebel Rock MS Duct Cooling Kit
Steering
Porsche Motorsport Cup Electronic Powersteering Pump with OEM lines and Fittings
OMP 330mm Steering Wheel
OMP Quick Release Hub
Wheels
CCW C10's powder coated Guards Red
Aerodynamics
Porsche Motorsports 997.1 Cup Car front Bumper
Porsche OEM 997 Front Fenders
Porsche OEM 997 Hood with Motorsports Naca duct
Interseries Rear Decklid with 996 Cup Wing


These are also quite interesting. PDK and manual Caymans with 997 GTS engines.
http://www.youtube.com/watch?v=hXyaOgqhchw&fea...
Not so sure about Rum Bum though ...
Although the comment that they are easier to drive nearer the limit than 911s tends to echo comments in other recent threads. I would not be surprised if a 6GT3 struggled against either of these.
http://www.youtube.com/watch?v=hXyaOgqhchw&fea...
Not so sure about Rum Bum though ...
Although the comment that they are easier to drive nearer the limit than 911s tends to echo comments in other recent threads. I would not be surprised if a 6GT3 struggled against either of these.
And here's the Troll Lite version of that same post.

spec
Suspension
- Porsche Motorsport Cup Car 2-piece Forged Control arms ( Grand am Spec )
- Porsche Motorsport Cup Car Front Tie Rod Kit
- Porsche Motorsport Cup Car Rear Toe Kit
- Champion Motorsport Front Trailing Arm Kit
- RSS Rear Toe Locking Plates
- Tarett Bladed Front Sway Bar with Adjustable Drop Links
- Tarett Bladed Rear Sway bar with Adjustable Drop links and in cabin adjustability
- MCS 3-Way Coilovers with 750-800 spring Setup
Drivetrain
Numeric Racing Short Shifter
Numeric Racing Shift Risers
OS Giken LSD
Aasco Lightweight Aluminum Flywheel
Sachs Sport Clutch and Pressure Plate
RSS clutch Stop
RRMS Remote Clutch Bleeder
Wevo Transmission Mounts
Engine
Porsche 3.8L Motor
EVOMSit Software ( 98 oct file )
IPD Competition Plenum
Porsche GT3/RS Throttle Body ( 82 mm )
Custom 3.5 inch cold air intake
Wevo Motor Mount
A/C Delete
Power Steering Removal
BBI Lightweight Crank pulley
RRMS / Lucas Fab Long Tube Race Headers
RRMS/ Lucas Fab Race Exhaust
OEM Porsche Center Radiator Kit
Safety
1 3/4 inch Custom Roll Cage ( Chromoly )
Schroth 6 Point Race Harness
Roll Bar padding
OMP RSPT Race Seat
OMP Sliders
Planted Seat Brackets
Electronics
Motec CDL-3 Track Kit with Data Logging
Electronic Cut off Switch ( Interior and Exterior )
Fuse Panel in cabin for all accessory power
Carbon Dash panel for all Switches
Racing Radios Communication Kit
Sabelt Fire System
Brakes
Pagid RS29 Brake Pads ( Front and Rear)
StopTech Trophy Race BBK Kit ( 380 front / 345mm Rear )
997S Front Uprights to allow for 380mm StopTech Kit / 6 Piston Calipers
OEM Porsche GT3 Master Cylinder
Motul RBF 660 Fluid
Rebel Rock MS Duct Cooling Kit
Steering
Porsche Motorsport Cup Electronic Powersteering Pump with OEM lines and Fittings
OMP 330mm Steering Wheel
OMP Quick Release Hub
Wheels
CCW C10's powder coated Guards Red
Aerodynamics
Porsche Motorsports 997.1 Cup Car front Bumper
Porsche OEM 997 Front Fenders
Porsche OEM 997 Hood with Motorsports Naca duct
Interseries Rear Decklid with 996 Cup Wing


mrdemon said:
Here's an interesting build of a track biased Cayman. Hope you enjoy it.

spec
Suspension
- Porsche Motorsport Cup Car 2-piece Forged Control arms ( Grand am Spec )
- Porsche Motorsport Cup Car Front Tie Rod Kit
- Porsche Motorsport Cup Car Rear Toe Kit
- Champion Motorsport Front Trailing Arm Kit
- RSS Rear Toe Locking Plates
- Tarett Bladed Front Sway Bar with Adjustable Drop Links
- Tarett Bladed Rear Sway bar with Adjustable Drop links and in cabin adjustability
- MCS 3-Way Coilovers with 750-800 spring Setup
Drivetrain
Numeric Racing Short Shifter
Numeric Racing Shift Risers
OS Giken LSD
Aasco Lightweight Aluminum Flywheel
Sachs Sport Clutch and Pressure Plate
RSS clutch Stop
RRMS Remote Clutch Bleeder
Wevo Transmission Mounts
Engine
Porsche 3.8L Motor
EVOMSit Software ( 98 oct file )
IPD Competition Plenum
Porsche GT3/RS Throttle Body ( 82 mm )
Custom 3.5 inch cold air intake
Wevo Motor Mount
A/C Delete
Power Steering Removal
BBI Lightweight Crank pulley
RRMS / Lucas Fab Long Tube Race Headers
RRMS/ Lucas Fab Race Exhaust
OEM Porsche Center Radiator Kit
Safety
1 3/4 inch Custom Roll Cage ( Chromoly )
Schroth 6 Point Race Harness
Roll Bar padding
OMP RSPT Race Seat
OMP Sliders
Planted Seat Brackets
Electronics
Motec CDL-3 Track Kit with Data Logging
Electronic Cut off Switch ( Interior and Exterior )
Fuse Panel in cabin for all accessory power
Carbon Dash panel for all Switches
Racing Radios Communication Kit
Sabelt Fire System
Brakes
Pagid RS29 Brake Pads ( Front and Rear)
StopTech Trophy Race BBK Kit ( 380 front / 345mm Rear )
997S Front Uprights to allow for 380mm StopTech Kit / 6 Piston Calipers
OEM Porsche GT3 Master Cylinder
Motul RBF 660 Fluid
Rebel Rock MS Duct Cooling Kit
Steering
Porsche Motorsport Cup Electronic Powersteering Pump with OEM lines and Fittings
OMP 330mm Steering Wheel
OMP Quick Release Hub
Wheels
CCW C10's powder coated Guards Red
Aerodynamics
Porsche Motorsports 997.1 Cup Car front Bumper
Porsche OEM 997 Front Fenders
Porsche OEM 997 Hood with Motorsports Naca duct
Interseries Rear Decklid with 996 Cup Wing


No, I know where I brake on that track any way, I want to see where you do ;-), plus the advantage the 911 platform gives over mid engine at a track I know.
As when I think of Donnington it's hard to see the 911 advantage on any of those bends pre apex imo, So I am looking forward to some skills training :-)
I guess Jonny might let me on later in the night for a fee and I can take you out in mine, but the venue is full atm.
As when I think of Donnington it's hard to see the 911 advantage on any of those bends pre apex imo, So I am looking forward to some skills training :-)
I guess Jonny might let me on later in the night for a fee and I can take you out in mine, but the venue is full atm.
Gassing Station | Porsche General | Top of Page | What's New | My Stuff




k that - no radio or a/c?
