Softronic Flashing
Softronic Flashing
Author
Discussion

wallyk997

Original Poster:

3 posts

140 months

Saturday 10th January 2015
quotequote all
The issue started a few months ago where my 997 was having cold misfires. The engine light would come on and the reading was multiple misfires. Otherwise, the car ran fine. I then changed the coils, plugs, air filter, temp sensor, battery, MAF sensor and solenoid valve adjusters. The cold start misfires would not go away. Finally, I had the car boroscoped and the Porsche dealer did not find anything wrong with the engine. After 12 hours of diagnostics at Porsche dealer, it came down to the clutch or reprograming the DME and losing the Softronic flashing. I decided to go with reprograming the DME which was the less expensive option. Since reprograming the DME, the car has not had any cold misfires. No one has ever touched the DME since the Softronic software flashing. According to the Porsche dealer, the software was corrupted.

In hindsight, it would have been easy for me to have the DME flashed back to Porsche default, however I did not realise that the software could get corrupted. Hopefully my experience will help someone else in the future.

rjn21

295 posts

193 months

Sunday 11th January 2015
quotequote all
So just to confirm the timeline - you had the Softronic flash and all was ok for a bit, then the problems started.

How was the OPC on reflashing the DME? LOts of teeth sucking and "we shouldn't really do that", or "its knackered so for ££ we'll fix it." Did they know it had been modded (had some experience of "you have modded the maps, welcome to barge pole world").

wallyk997

Original Poster:

3 posts

140 months

Sunday 11th January 2015
quotequote all
Yes the Softronic flashing worked for a few years then suddenly I started getting misfires. I never thought it could be the Softronic software. The Porsche dealer knew that the car has been flashed. It was their idea to flash it back to factory default.

Matt Seabrook

563 posts

280 months

Sunday 11th January 2015
quotequote all
Had the car been jump started or battery run very low before the problems started?

It seems possible that standard or modified map may well have suffered the same issue. The problem with the modern motor car is you now have three issues to consider when diagnosing faults. Years ago you either had a mechanical issue or an electrical issue both of which could be tested with the right knowlage and equipment. Now days you have a third issue which is software and that is not so easy to work out if it's faulty or not.

Diagnostic work is not cheep as even a simple issue takes time to accurately diagnose.

wallyk997

Original Poster:

3 posts

140 months

Sunday 11th January 2015
quotequote all
That's a good point about the battery as one of the things that I did was put in a new battery after the problem of misfires started.

Matt Seabrook

563 posts

280 months

Sunday 11th January 2015
quotequote all
If the battery went low and the car was jump started or stuck on a battery charger that caused a spike this can cause problems with ECU's, just a thought wink