Cayenne chassis squeak
Cayenne chassis squeak
Author
Discussion

whippy930

Original Poster:

193 posts

190 months

Friday 8th January 2016
quotequote all
Hi there, I recently acquired a very fresh 65k mile 2005 Cayenne Turbo as a run around car for when home pretty infrequently in Ireland. Between Ireland and Kazakhstan, it's my fourth one and generally, I'm really happy with it - it seems to have, thus far, dodged many of the "trouble bullets"

Two small things though. There's an extremely annoying constant squeak coming from, pretty much, the underside middle of the vehicle... It seems suspension/chassis flex related but sounds exactly like a ball joint squeak, except coming from the wrong location. With ac/dc on the (excellent Bose) stereo up really loud it's not an issue but it's actually pretty embarrassing around town..... To make even less sense, it seems to be less frequent/loud when on 'comfort' shock absorber setting than when on 'sport' - mad, I know. Any thoughts folks?

Secondly, the rear (main) tailgate (not glass panel) is locked shut. It's neither open nor closed fully though... I can still hear the electronic whirr when I put my fingers on the pressure pad to open it but once the 1 second long noise stops - nothing happens! Having looked on Rennlist, this seems common enough and you can flip off a plastic panel on the inside on the tailgate door and force the motor arm to the left - I've done this, it worked one time but not again and I remain in neither open nor closed limbo. Thankfully it's not open enough to leave an interior light on and drain the battery. Any suggestions or similar experiences rectified would be greatly appreciated.

Thanks in advance.

majordad

3,630 posts

226 months

Friday 8th January 2016
quotequote all
I've copied this to the Cayenne section of PCGB forum for you. Anyone here know the answers ?

whippy930

Original Poster:

193 posts

190 months

Friday 8th January 2016
quotequote all
Thanks, Dave. thumbup

Demort

76 posts

141 months

Friday 8th January 2016
quotequote all
The noise you have is most likely the center propshaft bearing , ive changed a few propshafts before for the symptoms you describe.

I think some independants can change just the center bearing but an Opc will want to change the propshaft so worth phoneing around.

Tailgate is a bit dificult , you have used the manuel release and thats all there is , im guessing something has jamed after you first opened it , try lubricating the manuel release and working it back and forth.





Just reread your post ... get someone to push on the tailgate as you push the motor rod , it might release then , if not its the lock its self thats jammed , lubricate that and keep fingers crossed smile




Edited by Demort on Friday 8th January 19:25


Edited by Demort on Friday 8th January 19:26

whippy930

Original Poster:

193 posts

190 months

Saturday 9th January 2016
quotequote all
Thank you for your response! I will investigate both suggestions you mention for each problem!