GT2RS roll cage..
GT2RS roll cage..
Author
Discussion

TKM

Original Poster:

26 posts

247 months

Saturday 16th January 2016
quotequote all
Hi

I recently aquired the GT2RS GT Silver from Hexagon Classics, it is a car from New Zealand. In the fromnt foot wells it has circular cuts in the carpets and if you lift this up there are bolts for a front cage to be fixed.... was this a standard part of the Clubsport package, or is it concerning ? Apologies if its an ill informed question , trying to get peace of mind.

Car originally beloned to Andrew Whittaker of Whittaker chocolate Co in NZ if this rings any bells ?

Thanks

Hobo

6,605 posts

275 months

Saturday 16th January 2016
quotequote all
May be wrong but don't believe the 2RS came with full cage.

He did race the 2RS, which is well recorded, so would assume (maybe uncorrectly) that he had the full cage fit by one of the specialists who do such, to comply with the racing regulations.

I'm sure someone who owns, or has owned one, will be along shortly to confirm.

MDL111

8,875 posts

206 months

Saturday 16th January 2016
quotequote all
isn't it the same on all Clubsport / RS models - for which you can buy the front section of the cage and install if needed?

Hobo

6,605 posts

275 months

Saturday 16th January 2016
quotequote all
Looking at interior pics on the Web, are the holes not for fitting the fire extinguisher ?

Hobo

6,605 posts

275 months

Saturday 16th January 2016
quotequote all

88racing

1,748 posts

185 months

Saturday 16th January 2016
quotequote all
The 997 Clubsport cage wouldn't be suitable for circuit racing - at least not in Europe - no door bars.

Chris.

gtsralph

1,313 posts

173 months

Saturday 16th January 2016
quotequote all
For info on car you might reach out to Macca who is from NZ/Vatanu who was a regular poster here and on Rennlist

LaSource

2,642 posts

237 months

Saturday 16th January 2016
quotequote all
All 3.8 RS / 4.0 RS (and I assume 997 GT2 RS) with clubsport rear cage have the bolt points under the front carpet for a front cage too. If yours already has the foam material or surface carpet perforated edges cut then at some point it had a front cage installed.

The 3.8 / 4.0 RS front cage is a lot more substantial than previous front cages with double A-pillar bars, lower sill bars, and a cross section roof bar over driver's head.

Personally I would say there is nothing to worry about. Many european delivered RSs have front cages - less common on UK cars.



Edited by LaSource on Saturday 16th January 22:52

Geesus

118 posts

142 months

Monday 18th January 2016
quotequote all
TKM said:
Hi

I recently aquired the GT2RS GT Silver from Hexagon Classics, it is a car from New Zealand. In the fromnt foot wells it has circular cuts in the carpets and if you lift this up there are bolts for a front cage to be fixed.... was this a standard part of the Clubsport package, or is it concerning ? Apologies if its an ill informed question , trying to get peace of mind.

Car originally beloned to Andrew Whittaker of Whittaker chocolate Co in NZ if this rings any bells ?

Thanks
Hi there, I remember the car being advertised in New Zealand. This is the best place to find info out on any ex New Zealand car
http://rennlist.com/forums/rennlist-asia-pacific/2...

It's where all the active Porsche forum users from New Zealand hang out.