GT3 v 996 TT front tyres and rims??
GT3 v 996 TT front tyres and rims??
Author
Discussion

robinm

Original Poster:

102 posts

296 months

Wednesday 26th October 2005
quotequote all
The 996TT has 225 tyres on 8 inch rims.
The GT3 I believe has 235 on 8.5 inch rims.

Can you run the 235s / 8.5 rims on a TT without contacting the bodywork? Any other negative effects?

Is there any improvement in handling?

kevinday

13,766 posts

307 months

Wednesday 26th October 2005
quotequote all
More information is needed before a decision can be made. Firstly the wheels themselves:
Are they the same diameter?
Do they have the same stud pattern?
Do they have the same offset?
Then the tyres:
The full tyre measurements would be needed not just the width, because the diameter and profile are used to calculate rolling circumference.

seandudding

495 posts

277 months

Wednesday 26th October 2005
quotequote all
I beleive the offset of the GT3 and TT Wheels are different.

robinm

Original Poster:

102 posts

296 months

Wednesday 26th October 2005
quotequote all
Rim diameters are the same at 18 inch

Tyre profiles are 225/35/18 - 996TT
235/35/18 - GT3

Stud patterns and offset not known

PEVO

103 posts

249 months

Wednesday 26th October 2005
quotequote all
width 235mm is only 10mm more than the 225 on the tt -hence you can probably just put 235s straight onto a 8" rim. This solves the problem of offset, etc. You also will not increase the rolling diameter of the wheel by much - about 8mm roughly, but this may be enough to rub on the suspension, plus it will throw out your speedo. Maybe go for 235/30??

flemke

23,437 posts

264 months

Wednesday 26th October 2005
quotequote all
If there is any chance of a clearance problem you'd be wise to measure the actual tyres by hand.
Tyre manufacturers do not seem to agree on what a millimetre is: there are amazing discrepancies across brands in the physical dimensions of what are nominally identical size tyres.

kevinday

13,766 posts

307 months

Wednesday 26th October 2005
quotequote all
The change in diameter between 225/35/18 and 235/35/18 is 7mm, this is 1.1% increase in rolling circumference, not really significant. The 235/30/18 option that was suggested is 16.5mm smaller in diameter, a 2.8% resuction in the rolling circumference, this is significant, I would not consider it.

Personally I would go and chat to a Porsche service centre and ask them what they think?

robinm

Original Poster:

102 posts

296 months

Wednesday 26th October 2005
quotequote all
Got the profiles wrong. 225/40 and 235/40. Shouldn't make any significant difference to your comments, for which many thanks.

I wonder if anyone out there has tried different front tyres from standard on 996 turbo?