3.6 Varioram emissions test

[runner911]

Can anyone assist please ? Recently had my 1996 993 which is fitted with a 3.6 Varioram MOT tested. As usual, when carrying out the emissions test the tester found it almost impossible to achieve engine RPM of 1500-2000 to measure CO etc. Instead , as soon as pressure is applied to the accelerator pedal, RPM increases from 900 to 2200.
Would anyone with the same engine care to try to achieve 1500-2000 RPM by light pressure on the accelerator and let me know the result please ?

[verysideways]

I know my MOT guy very well and so whenever i take a car to him for MOT i also do the "driving seat" bit (brakes, lights, wipers, etc.)

I found it difficult in both my n/a 993's to maintain the 2k rpm he specified, but not impossible by any means... i suggest you try it in your car, and if you can do it and he can't then go back to him and suggest you sit in the car and do that bit for him.