944 Lowering

[dontlift]

I am looking to lower my 944 by 30 mm

No problem on the front with lowering springs etc, but how would i go about lowering the rear????

[domster]

I am looking to lower my 944 by 30 mm

No problem on the front with lowering springs etc, but how would i go about lowering the rear????

Giving Daz and Bluesatin a lift would probably achieve the effect you are after.



Sorry guys!!!

If dmsims is about, he will probably have a more technical reply. Maybe email his profile directly if he doesn't spot the thread.

[scottster]

Someone call the moderator to control the moderator please!!!

[Basil Brush]

I think there is about 3/4 of an inch or so of adjustment via the eccentric bolts on the rear trailing arms. Any more than that and you will have to reset the arms on the torsion bars.

Have a look at:

http://64.226.197.185/Paragon/Tech/944_rrha.htm

>> Edited by Basil Brush on Tuesday 21st January 14:05

[dontlift]

BOOM BOOM Nice one Mr Brush

[iguana]

I'm pretty sure you can get stiffer torsions from Automotion in the states, to match the harder lowered front springs.

[Basil Brush]

Or you could go for the 968 M030 coil over rears with helpers.

[DMSIMS]

Late as usual!

Have a gander at the suspension section on my website

www.944turbo.org.uk