Lowering a 924

[bovered79]

How do you lower the back end of a 924? the front is easier enough just get shorter spring but the back?

[924racer]

There's an eccentric bolt on the two spring plates which gives around an inch of movement and can be done pretty easily.

or if you want to adjust it by a larger amount...

take the torsion bars out and rotate the spring plates relative to the torsion bar tube. But this means that you have to work out the new angle to set them at. It also means that you have to take the torsion bar tube out, which is a big job as the whole rear suspension must come out. the other problem is you can only check the new ride height with it all back together and on it wheels, so if its wrong. you have to do it all over again

matt