GT2 - Front Central Radiator Protective Grill?
GT2 - Front Central Radiator Protective Grill?
Author
Discussion

drhildr

Original Poster:

453 posts

257 months

Monday 30th April 2007
quotequote all
Having just taken another stone strike (and subsequent repair cost with my OPC)in the central radiator I am now wondering if anyone has made a protective mesh or grill to help overcome this expensive problem? Any pointers?

cableguy

2,287 posts

240 months

Monday 30th April 2007
quotequote all
AFAIK not available for the GT2, only the GT3 in their increased no's.

If you have any luck locating anything, please let me know as I would definately be interested.

C.

Kurgen

1,447 posts

265 months

Monday 30th April 2007
quotequote all
me too! (interested)

996tt_stevo

4,078 posts

259 months

Monday 30th April 2007
quotequote all
Right, what you can do is buy the metal grill, (would buy Black), you cut the shape of the area you are going to fill plus another 1" to 2" extra, you buy some fibreglass P?? (can't remember number, lol) and you fit the grill over the area and apply fibreglasss compound all around the edge of the grill, this way it bonds to your front bumper/spoiler, don't apply to much, as you will most likely want to remove if selling! but it does work!

996tt_stevo

4,078 posts

259 months

Monday 30th April 2007
quotequote all
I maybe haven't made that to clear! (sorry, about to dash out the door!)

If anyone is serious about doing this, I can pm you instructions.

r1_jon

859 posts

274 months

Monday 30th April 2007
quotequote all
996tt_stevo said:
I maybe haven't made that to clear! (sorry, about to dash out the door!)

If anyone is serious about doing this, I can pm you instructions.


Could you post a pic of yours so we can see what it looks like done?

sportsandclassic

3,774 posts

249 months

Monday 30th April 2007
quotequote all
Hi

I have fitted this to a GT2 and its in this week for a job will take some pics and post up.

Mike

drhildr

Original Poster:

453 posts

257 months

Tuesday 1st May 2007
quotequote all
Great - keep me in the loop please!

sportsandclassic said:
Hi

I have fitted this to a GT2 and its in this week for a job will take some pics and post up.

Mike

sportsandclassic

3,774 posts

249 months

Tuesday 1st May 2007
quotequote all
Sorry i tried taking the pics but my camera is having a really bad day....it keeps saying memory card full but isnt...!!!

The vehicle is now gone but i will have it back in for a geometry setup in 3 weeks time.

Sorry again.

Mike

jj996

122 posts

256 months

Wednesday 2nd May 2007
quotequote all
I have done mine with black mesh bought from a car accessory shop.

If you take your bumper off and cut the mesh with tin snips a little larger than each opening, you can then use short self tapping screws and fix into the black plastic surround which has some small flap areas to stop you screwing through the bumper. (It will all become clear when you take the bumper off)

cableguy

2,287 posts

240 months

Wednesday 2nd May 2007
quotequote all
jj996 said:
I have done mine with black mesh bought from a car accessory shop.

If you take your bumper off and cut the mesh with tin snips a little larger than each opening, you can then use short self tapping screws and fix into the black plastic surround which has some small flap areas to stop you screwing through the bumper. (It will all become clear when you take the bumper off)


Any chance of a couple of pics?

C.

jj996

122 posts

256 months

Wednesday 2nd May 2007
quotequote all
cableguy said:
jj996 said:
I have done mine with black mesh bought from a car accessory shop.

If you take your bumper off and cut the mesh with tin snips a little larger than each opening, you can then use short self tapping screws and fix into the black plastic surround which has some small flap areas to stop you screwing through the bumper. (It will all become clear when you take the bumper off)


Any chance of a couple of pics?

C.


Cableguy - send me your email address and I will send you a picture - As I am not sure how to post piccies on the website.

964RS

1,357 posts

278 months

Wednesday 2nd May 2007
quotequote all
I'm off out this afternoon to buy some mesh for my GT3 as having both end radiators replaced tomorrow.

Can anyone recommend where to get the mesh???

Stuff at Halfords pimp my ride section looks rubbish!

cableguy

2,287 posts

240 months

Wednesday 2nd May 2007
quotequote all
jj996 said:
cableguy said:
jj996 said:
I have done mine with black mesh bought from a car accessory shop.

If you take your bumper off and cut the mesh with tin snips a little larger than each opening, you can then use short self tapping screws and fix into the black plastic surround which has some small flap areas to stop you screwing through the bumper. (It will all become clear when you take the bumper off)


Any chance of a couple of pics?

C.


Cableguy - send me your email address and I will send you a picture - As I am not sure how to post piccies on the website.


Done. Muchos Gracias.

C.

drhildr

Original Poster:

453 posts

257 months

Wednesday 2nd May 2007
quotequote all
Can you share....

cableguy

2,287 posts

240 months

Wednesday 2nd May 2007
quotequote all
drhildr said:
Can you share....


Of course my GT2 Buddy hehe you were the original poster...

C.

johnfm

13,752 posts

281 months

Wednesday 2nd May 2007
quotequote all
These mesh grills are £250 (375 euro) from Carnewal.

I am commissioning some for the GT3 from black hexagonal mesh. This has a 64% pass area, so air flow is not restricted as much as cheap stuff with smaller holes.

henna777

173 posts

236 months

Wednesday 2nd May 2007
quotequote all
drhildr said:
Having just taken another stone strike (and subsequent repair cost with my OPC)in the central radiator I am now wondering if anyone has made a protective mesh or grill to help overcome this expensive problem? Any pointers?


I spoke again today about this with OPC Cambridge, my GT3 is taking some real hits (previously posted a reply about this as I had purchased some from Carnewal and had sprayed up to match and wanted to fit) They said that there was no listing of parts for GT3, I guess also GT2, for protective grills and could not get into the motorsport site to see what the Carrera cups have, which they do. He suggested that Reading be made aware of the problem if there are a lot of owners concerned. I mentioned this site and that there are a lot of us, are porsche that naive (cannot believe so) that something is urgently needed?

ballast

226 posts

245 months

Wednesday 2nd May 2007
quotequote all
and me pls cableguy....!

johnfm

13,752 posts

281 months

Wednesday 2nd May 2007
quotequote all
964RS said:
I'm off out this afternoon to buy some mesh for my GT3 as having both end radiators replaced tomorrow.

Can anyone recommend where to get the mesh???

Stuff at Halfords pimp my ride section looks rubbish!



I am currently trying to source some pukka hexagonal stuff.

Should have it by Monday. Will let you know.