928 maintenance advice

[funkyboogalooo]

Well today I bought a 928 S2 manual as advertised on here. I pick it up tomorrow. The first job and the most major one is a full respray which I allready have booked in. However to prepare for this I need to remove the front and rear bumpers. Does anyone know of a good guide to doing this quickly and efficiently?
Cheers
Mike

[Brett928S2]

Hi

I am the PCGBs 928 Forum moderator....I also own an S2....

I wouldnt do a respray FIRST...

Get the electrics and any mechanical bits done first....THEN respray it...

There are lots of 928 write ups for things like front/rear PU removal on Rennlist >>> http://forums.rennlist.com/rennforums/forumdisplay... will need new rubber seals afterwards usually, also if the headlamp washer jets need replacing ...do them while PU is off (only way)

All the best Brett

Edited by Brett928S2 on Wednesday 20th June 01:44

[funkyboogalooo]

Thanks Brett
In fairness to the car mechanically and electrically its sound, a couple of small mechanical things that I've arranged Paul Anderson to do for me but the rest is cosmetic. Hence why i'm getting it done straight away. i shall check out that link.
Thanks again
Mike