STAINLESS STEEL HEATER EXCHANGERS FOR A 930 TURBO 87

[SEE YA]

Hello, all looking into a the price for a set as my car will need them next year .Also has anyone done it themselves fitted them, and how much would it cost to get them fitted if I did not have the time to do it?.

Any help more then welcome thank you.

SEE YA

[Agent Orange]

Never did them on my 930 ,but fitting, age allowed for just dead easy, SUBJECT to studs coming out !!!! Have to believe Danske the ones to go for , they fit right, on whatever they make and last as they should ..............reckon u can deal for under £1000 if u work at even as low as £600

[carylwills]

Only becomes a difficult job if you snap a stud off. My 930 has been garaged all its life, only used in the dry and only done 36,000 miles when the heat exchangers had to be removed for other work. Bob Watson did the work and said that it was a bit*h because quite a few studs broke off - even though he had heated the nuts to get a bit of differential thermal expansion to release their grip on the studs.

If you do the job yourself and you get a broken stud you need to use a jig to drill out the old stud and re-tap the hole. If the drill is not exactly in the right place you can then wreck the head and need to remove it for heli-coiling.

FWIW I wouldn't take the risk, unless you have all the kit and jigs to rectify any studs that may break.

C

Edited by carylwills on Thursday 12th July 10:18

[SEE YA]

Yes that is my thoughts as well I know I can do the job but if a stud breaks and knowing my luck it would .

SEE YA