993TT remapping
Author
Discussion

Chris V

Original Poster:

2 posts

232 months

Wednesday 25th July 2007
quotequote all
First post, so hi all!

I've just bought a 993TT and would like to do the filter/exhaust/ECU upgrade. I've bought some muffler bypasses for sound more than power (although this might yet prove to be a mistake) and was going to go for a BMC or K&N panel. I've been told that there isn't much to gain from high flow cats so wasn't going to bother

My question is who do I use for the ECU bearing in mind that it is a 1996 model? And has anyone had any experience of Imagine Autos kits as they look amazing value? Those that I had in mind are RS Tuning, 9ff and FVD.

Any feedback greatly appreciated.


phelix

4,683 posts

280 months

Wednesday 25th July 2007
quotequote all
Lot's of discussion about this on Rennlist; I think general consensus is that you won't get much more than 430-440 hp out of the stock K16 turbos. Performance air filters/intakes are of dubious value and more cash flow devices for the seller than anything else

I'll have a factory 430 ECU to sell within a couple of months.

lanesra10

314 posts

262 months

Wednesday 25th July 2007
quotequote all
Concur with phelix though you can get 450/60 bhp on the k16's with an RS chip, quite a few swear by the 100 cell cats though I havent bothered, better places to spend your bucks.

Muffler bypasses are a must for the sound value though neighbours and track days are a problem. After fitting get a friend to blast past you for the goosebump value.

Rennlist is the place to get the best advice on upgrades(though you will get quite a few of them on here) and you should pay special attention the ones that 'Kevins' does for VFM ie stage 1, 2 perhaps even 3.

Chris V

Original Poster:

2 posts

232 months

Thursday 26th July 2007
quotequote all
Thanks for that chaps, I'll take a look at Rennlist.

Agent Orange

2,078 posts

271 months

Thursday 26th July 2007
quotequote all
Try having a chat with Wayne Schodield , Trades as Chips wizard ......does great things with 993 s !!!

MOD500

2,687 posts

281 months

Thursday 26th July 2007
quotequote all
With respect stick with RS, Ruf, or Kevin's kits.

Edited by MOD500 on Thursday 26th July 20:46

kennyboy

641 posts

270 months

Thursday 26th July 2007
quotequote all
MOD500 said:
With respect stick with RS, Ruf, or Kevin's kits.

Edited by MOD500 on Thursday 26th July 20:46
add the word 'motronic' when doing the 993tt tuning searches on rennlist and here Chris....

IMO fixed boost BAD, motronic boost GOOD! wink

circo

102 posts

269 months

Friday 27th July 2007
quotequote all
Wayne Schofield is your man. remapped my supercharged 993 with great results. All the advice you need you'll get from him. 01706 651000

phelix

4,683 posts

280 months

Friday 27th July 2007
quotequote all
MOD500 said:
With respect stick with RS, Ruf, or Kevin's kits.
What about Porsche?! biggrin

MOD500

2,687 posts

281 months

Friday 27th July 2007
quotequote all
Sorry Phelix, yes of course, the 430 Porsche kit from www.carnewal.com is good value driving

Agent Orange

2,078 posts

271 months

Friday 27th July 2007
quotequote all
Dont get the wrong idea abt Wayne , hes litterally a bespoke mapper with vast experience of Pork.............hes done a 993 GT2 for me up to serious level , i have watched him improve mid range on a norrmally aspirated 993 to the owner wanted to kiss himand work miracles on 993 tt s ..............this is no bolton chip jockey !!!!
U tell him what u wish to acheive he justt dsits there quietly and does it .........

VerySideways

10,272 posts

303 months

Friday 27th July 2007
quotequote all
My 993tt with Techart 100 cells, Techart boxes, and an RS tuning ecu (and running K16's) ran 448bhp - from what i understand that's about as good as you'll get from the K16's. Faster than the factory 450 kit though biggrin

VerySideways

10,272 posts

303 months

Friday 27th July 2007
quotequote all
I've been thinking about getting Wayne to have a go at my C2. Anyone used him for n/a 993 applications? Verdict?

kennyboy

641 posts

270 months

Saturday 28th July 2007
quotequote all
VerySideways said:
I've been thinking about getting Wayne to have a go at my C2. Anyone used him for n/a 993 applications? Verdict?
I've used Wayne on 3 different 993 carrera's Pete - great results every time!

I should say - I wouldn't use Wayne (or any fixed mapper) for the TT though, different ball game.