996TT light warning
Discussion
My 996TT had been left for over 5 days so the remote didn't work. So I unlocked it with the key and by accident set off the alarm.
After driving it and parking up, I turned it off and a warning bell goes off when I open the door. The car says the light is on but no lights were on ?
I'm not sure if the alarm going off and this warning light are related but its all happened at the same time ????????
After driving it and parking up, I turned it off and a warning bell goes off when I open the door. The car says the light is on but no lights were on ?
I'm not sure if the alarm going off and this warning light are related but its all happened at the same time ????????
Edited by andyscoobs on Sunday 26th August 17:39
Just in case anyone else has this problem in the future.
The ECU came up with code 9142 which means the instrument cluster is broken.
This wasn't the case.
Inside the engine bay 2 wires had worn and the 2 lives were touching each other causing the problems above.
All sorted once the wires were found
Skint but happy
The ECU came up with code 9142 which means the instrument cluster is broken.
This wasn't the case.
Inside the engine bay 2 wires had worn and the 2 lives were touching each other causing the problems above.
All sorted once the wires were found
Skint but happy
Gassing Station | Porsche General | Top of Page | What's New | My Stuff