BECKER TRAFFIC PRO SAT NAV (High Speed)
BECKER TRAFFIC PRO SAT NAV (High Speed)
Author
Discussion

toby tucker

Original Poster:

648 posts

295 months

Wednesday 26th September 2007
quotequote all
I have a unit that been sitting about for while waiting for me to fit it into the standard DIN slot in the dash (Oct '01 996TT).

I'm going to try fitting it myself this weekend - has anyone got experience of fitting one and /or advice on any probs I'm likey to run into?

Thx Toby

Edited by toby tucker on Wednesday 26th September 19:57

HONEYMON57ER

562 posts

241 months

Wednesday 26th September 2007
quotequote all
I fitted a Becker unit and the only problem is that
my alarm beeps at me when I set it. Apparently this
is due to a terminal which is no longer used. I think
if you search on Renntech you'll find a solution to this
little problem. Other than that it was easy to fit however
if you are fitting a mike for bluetooth phone connecton
most people go to the trouble of removing the A piller trim
to run the mike to the roof. I didn't fancy doing that so I
ran it under the dash below the steering wheel and came out
just above the right hand airvent. There is a diagram on how to
remove that item, again on Renntech.
http://www.renntech.org/forums/index.php?showtopic...

simkin911

136 posts

240 months

Wednesday 26th September 2007
quotequote all
Toby, I just bought exactly the same unit today (Becker, Traffic Pro High Speed). I posted a question about it last week and was pointed towards Rennlist - this is for my 944 s2.
http://www.pistonheads.com/gassing/topic.asp?h=0&a...

I'm a total novice so will probably elect after some humming/hawwing to just someone to fit it for me but I'd be delighted to hear your experiences. I'll do some research first though. Thanks.

cytefx

199 posts

262 months

Wednesday 26th September 2007
quotequote all
just finished fitting my cascade in a 993 turbo, boy that is a tight fit, but its gone in, they are normally straight forward, if in doubt get a friend to help, and look to see if anybody makes an adaptor so you do not need to cut the wires.

LeeME3

1,502 posts

257 months

Wednesday 26th September 2007
quotequote all
I've done this fit and it is really easy - look back through the topics I've started and you should find everything including links to relevant renntech info, how to stop the alarm beep, why your speakers seem to have packed up (if you have a separate amp), why you don't need to bother with the reverse line (but do ground it or it thinks you're going backwards all the time). It was over a year ago so you may have to do a bit of a search, any questions after that feel free to PM me and I'll see if I can help.

simkin911

136 posts

240 months

Saturday 29th September 2007
quotequote all
LeeME3, can you help (again) or anyone else? Went to my local car audio specialist today with my recently purchased Traffic Pro 7825. Asked how much to install for me. I currently only have a (very) old cassette player in situ and it's spaghetti wiring behind it...anyways - I was told I need a Speed Impulse Generator (for my '92 944 S2) and all the required connectors etc... total price for proper installation "only"... £320.

Presumably if I need anything else such as an aerial or whatever it'll cost more?

Pretend I know nothing (which I do !), do I need a speed impulse generator to be fitted? What do I need? Certainly, if it's going to cost anywhere near £300 - I've made a mistake and will be looking for a new buyer for this piece of kit!! I've looked on Renntech & rennlist but I confess I'm now reading so much I'm actually getting more confused... frown

Help please angel

simkin911

136 posts

240 months

Monday 1st October 2007
quotequote all
Anyone offer any advice please..... confused

LeeME3

1,502 posts

257 months

Wednesday 3rd October 2007
quotequote all
YHM

DirkDiggler

253 posts

262 months

Wednesday 3rd October 2007
quotequote all
i think the speed impulse generator is used to generate a signal for speed sensitive volume control on a mechanical speedo, ie ithe volume increases (according to your settings) as you get faster.

digital speedos output this signal without the generator.

toby tucker

Original Poster:

648 posts

295 months

Sunday 28th October 2007
quotequote all
Well I finally got round to fitting the TrafficPro High Speed 7820 unit this week end with no probs - apart skinning my knuckles by having to route the wire for the GPS receiver from the top of the dash to the back of the unit, the only other (minor) complication was having to 'jumper' power to the amp. This is well documented on here/Rennlist forums.

I didn't have to bother with any of the other stuff like GAL input etc which wasn't needed for this unit to work a treat.

Thx to every one who gave me guidance on fitment



Edited by toby tucker on Sunday 28th October 20:24