Carrera GT?
Author
Discussion

Val

Original Poster:

199 posts

265 months

Friday 5th October 2007
quotequote all

If anyone has one, spend time with one, would appreciate if you could answer some of my questions.

Im considering a 2004 car with low miles, imported from US to Russia. Im planning to use it for semi daily drive (basically when there is no traffic), auto-x non-competitively around once every two weeks as well as track it about once every month.

From what i gathered so far the car has pretty much only two problems - clutch and front clearance. Apparently clutch is just something one needs to get used to. Clearance would be a bit of a headache especially in Moscow i would guess. What happens though if you do hit a high speedbump? Is it just scratching the lower lip or something more serious? I also heard that there is a kit avalible to raise the car?

Thanks!

TB993tt

2,079 posts

272 months

Friday 5th October 2007
quotequote all
The clutch material was apparently changed from the very first press cars and most cars have the new material (fitted as the original ones wore out presumably prematurely through use/abuse)
The clutch (new material) is only an issue to start from a stand still, in order to make it last you must release it slowly and fully and allow the ECU to get the car moving at idle speed. As soon as the car moves and the clutch is fully out then the throttle can be applied -from there onwards the clutch is perfect.
Variations on slipping starts can be achieved but my guess is it will wear out much faster.
Hill starts are not pleasant but with practice you can get used to it. The clutch is also unassisted and feels pretty heavy to those used to a hydraulic system.

Regarding the height, it is the front overhang which is the problem and the front lip is considered (I guess) sacrificial and is quite cheap to replace when you rip it off.... The height is not really an issue as a daily driver as long as you avoid known big speed bump areas.
Ruf do a front hydraulic lifting kit @ 15K Euro and apparently Manthey are also developing one.
The factory can give you longer suspension arms to raise by ~10mm but that would seem hardly worth it IMO and you would imagine it to compromise high speed aerodynamics somewhat (although its a factory option so ??)

Val

Original Poster:

199 posts

265 months

Friday 5th October 2007
quotequote all
Ah thanks! RUF system seems like a very nice option. Could you drop me a link of some sort? Couldnt find it on thier website.

Val

Original Poster:

199 posts

265 months

Friday 5th October 2007
quotequote all
TB993tt said:
Regarding the height, it is the front overhang which is the problem and the front lip is considered (I guess) sacrificial and is quite cheap to replace when you rip it off...
So if i do hit a speedbump, front lip goes first?

GT

1,407 posts

289 months

Friday 5th October 2007
quotequote all
Val said:
TB993tt said:
Regarding the height, it is the front overhang which is the problem and the front lip is considered (I guess) sacrificial and is quite cheap to replace when you rip it off...
So if i do hit a speedbump, front lip goes first?
if you hit a big speedbump (and i have seen some pretty big ones in moscow!), half the car will go first. lip only protects maybe 20mm, anything higher and you will hear what I would imagine to be a horribly expensive sounding crunching of carbon.


Weltmeister

448 posts

262 months

Friday 5th October 2007
quotequote all
Val
When I first met you I thought you were mildly nuts ? Now I am convinced that you are totally nuts !
First you turbo charge your Elise and use it as a daily hack, now you want a CGT. In Moscow in that car you will stand out more than just a little.

You only live once of course, so go for it. BTW did you get your results from Oxford yet ?

Cheers

Allan

Val

Original Poster:

199 posts

265 months

Friday 5th October 2007
quotequote all

GT said:
if you hit a big speedbump (and i have seen some pretty big ones in moscow!), half the car will go first. lip only protects maybe 20mm, anything higher and you will hear what I would imagine to be a horribly expensive sounding crunching of carbon.
Hopefully im not going to hit anything big! More like scrub along smile

My elise is about 10 cm in the front, but overhand is short. I scratch front lip all the time, but so far i havent even replaced it, not to mention damaged the car!

As far as i understand front clearance is around 10 cm as well on CGT. 10 cm + 20 mm = 12 cm which doesnt look bad, just have to approach everything from the side.

Weltmeister said:
Val
When I first met you I thought you were mildly nuts ? Now I am convinced that you are totally nuts !
First you turbo charge your Elise and use it as a daily hack, now you want a CGT. In Moscow in that car you will stand out more than just a little.

You only live once of course, so go for it. BTW did you get your results from Oxford yet ?

Cheers

Allan
Hey Allan!

I am nuts, youre right, but as you said you only live once smile

Unfortunately only got 2nd from Oxford, which is ok i guess.

Turbo kit is working very nice. Dealer took AGES to install it. Only got it back 3 weeks ago, and on piggyback. But its working great, put around 4 trackdays and 3k miles on it so far. Bloody fast and capable!

GT

1,407 posts

289 months

Friday 5th October 2007
quotequote all
Val said:
GT said:
if you hit a big speedbump (and i have seen some pretty big ones in moscow!), half the car will go first. lip only protects maybe 20mm, anything higher and you will hear what I would imagine to be a horribly expensive sounding crunching of carbon.
Hopefully im not going to hit anything big! More like scrub along smile

My elise is about 10 cm in the front, but overhand is short. I scratch front lip all the time, but so far i havent even replaced it, not to mention damaged the car!

As far as i understand front clearance is around 10 cm as well on CGT. 10 cm + 20 mm = 12 cm which doesnt look bad, just have to approach everything from the side.
As a good guide, I can get over medium sized London speedhumps, if I crawl over at an angle, without scraping the lip. Any of the really big ones, and forget it.
Also to be aware of is 2 flaps that hang down in front of the rear wheelarches (think they are something to do with cooling or aero) I think they will scrape over a speedhump too.
I have been very careful with mine, and so far just minor grazing to the lip spoiler, and once grazed the rear flap things. You just have to go over things VERY slowly. smile

Val

Original Poster:

199 posts

265 months

Friday 5th October 2007
quotequote all
Sounds aright, but not too good smile

Btw, i also wanted to install 4pt belts. Are there mounting points for harness and lap belts?

993rsr

3,678 posts

280 months

Friday 5th October 2007
quotequote all
Val said:
Sounds aright, but not too good smile

Btw, i also wanted to install 4pt belts. Are there mounting points for harness and lap belts?


There is a kit available from Carnewal that allows Schroth Harnesses to be installed. The waist/crotch harness attach to the seat/tub and the shoulder harness attaches to the tub adjacent to the apertures in the seat back. It makes all the difference when tracking the car.

Edited by 993rsr on Friday 5th October 12:50

Val

Original Poster:

199 posts

265 months

Friday 5th October 2007
quotequote all
Just called RUF. They do indeed make this kit, adds 7 kilos and 5cm of clearance. Sounds awesome!

993rsr said:
There is a kit available from Carnewal that allows Schroth Harnesses to be installed. The waist/crotch harness attach to the seat/tub and the shoulder harness attaches to the tub adjacent to the apertures in the seat back. It makes all the difference when tracking the car.
Ah ok cool. Are there specific mounting points or do they have to be drilled?

Edited by Val on Friday 5th October 14:06

993rsr

3,678 posts

280 months

Friday 5th October 2007
quotequote all
You have to drill and bond the fitting under the seat, if you look in the tub behind the drivers seat there are two raised areas, the bolts are fitted into there for the shoulder harnesses.

Also consider the Manthey/KW suspension kit that will comprise a lift of 35mm up to 60kmh, and offer the flexibility to make the set up more track biased.

993rsr

3,678 posts

280 months

Friday 5th October 2007
quotequote all


Edited by 993rsr on Friday 5th October 14:23

GT

1,407 posts

289 months

Friday 5th October 2007
quotequote all
993rsr said:


Edited by 993rsr on Friday 5th October 14:23
Like the steering wheel, is that techart?

993rsr

3,678 posts

280 months

Friday 5th October 2007
quotequote all
Carnewal supplied it, fantastic job, nicely trimmed in suede including the boss. I found there was too little room for your left elbow when using the car on track and I was knocking it on the door. Ideally I'd ditch the airbag wheel and fit a Momo- Porsche one, however I don't think it would really be in keeping with the rest of the car.

993rsr

3,678 posts

280 months

Friday 5th October 2007
quotequote all
Carnewal supplied it, fantastic job, nicely trimmed in suede including the boss. I found there was too little room for your left elbow when using the car on track and I was knocking it on the door. Ideally I'd ditch the airbag wheel and fit a Momo- Porsche one, however I don't think it would really be in keeping with the rest of the car.

Then just add these and it's an awesome track car.



Edited by 993rsr on Friday 5th October 14:32

Freewheeler

1,416 posts

239 months

Friday 5th October 2007
quotequote all
scratchchin Wonder if they do one in brown......

993rsr

3,678 posts

280 months

Friday 5th October 2007
quotequote all

Val

Original Poster:

199 posts

265 months

Friday 5th October 2007
quotequote all
Looks great!

Alright, everything seems to be awesome. Will go and make final arrangements now smile

GregE240

10,857 posts

298 months

Friday 5th October 2007
quotequote all
Cracking pic John.

Saw your car yonks ago at a garage near Silverstone when I accompanied DeR down there.....VERY nice. Is it still unsilenced?

Best,
Greg