GT2 which brakes
Discussion
Hi guys,
No surprises I think I have damaged one of my ceramic discs.
Anyway, just wondering what people have changed to? I have spoken to a couple of guys on here who have been very helpful. Votes so far seem to favour Alcons with standard pads - the car is mainly a road car which I use on the track, next year I hope to do 5-10 trackdays. Alternative is the Performance Friction Steels offered by Fearnsport. I have so far been recommended not to go the Pagid RS29 route for pads due to excess noise and that standard pads would be better on a road car.
Cost difference between these 2 options seems like just under 2k with goodridge hoses and changed brake fluid for Performance Friction option, or around 3k for alcons all round. Although thats quite a difference in price I'd rather just get the best set up for the car!
Thanks for the help in advance!
Cheers
No surprises I think I have damaged one of my ceramic discs.
Anyway, just wondering what people have changed to? I have spoken to a couple of guys on here who have been very helpful. Votes so far seem to favour Alcons with standard pads - the car is mainly a road car which I use on the track, next year I hope to do 5-10 trackdays. Alternative is the Performance Friction Steels offered by Fearnsport. I have so far been recommended not to go the Pagid RS29 route for pads due to excess noise and that standard pads would be better on a road car.
Cost difference between these 2 options seems like just under 2k with goodridge hoses and changed brake fluid for Performance Friction option, or around 3k for alcons all round. Although thats quite a difference in price I'd rather just get the best set up for the car!
Thanks for the help in advance!
Cheers
Sorry to thread hijack, but speaking of GT2s does any know how the old Gumball car is doing? That was a bargain and a half.
HENRY - EXPECT A VISIT!!!!!!!!!!!!!!!!!!
www.911virgin.com/gt2tnc.htm
HENRY - EXPECT A VISIT!!!!!!!!!!!!!!!!!!
www.911virgin.com/gt2tnc.htm
It is good to hear that the alcons are better performance. I'd like to run RS29s on the track and standard pads on the road, I guess maybe I would just swap the front pads at the start of the track season next year. And go back to standards for the winter when I am not tracking the car
Irish said:
Sorry to thread hijack, but speaking of GT2s does any know how the old Gumball car is doing? That was a bargain and a half.
HENRY - EXPECT A VISIT!!!!!!!!!!!!!!!!!!
www.911virgin.com/gt2tnc.htm
Going strong still I believe.HENRY - EXPECT A VISIT!!!!!!!!!!!!!!!!!!
www.911virgin.com/gt2tnc.htm
R1_JON said:
You can notice the extra weight but it is a very minor negative IMHO given the cost savings over ceramics. Most of my driving is fast road, hardcore track drivers may find the difference more pronounced.
Got to disagree with you heartily there Jon, I've been driving around with the Alcons (road use bar one bit of track work) for 10,000 miles now. Having put the ST carbon ceramic discs on the car a month ago (which are about 500g heavier than the original PCCBs) the difference was shocking.With the ceramics fitted, the car feels so much more compliant over bumps (especially mid corner bumps that would previously throw it off line) the turn in is waaaaay more crisp, and the steering weight much reduced.
If you don't believe me, try doing a back to back test (unlikely I know) the difference is an eye opener.
As for the difference on road or track, I'd say that running stickier track tyres with increased camber front and rear would mask the weight of the steel discs more effectively than a standard car with road tyres (and geo settings)
timmo said:
If you are getting rid of a front ceramic and its still ok give us a shout
Im looking for a front ceramic disk !
BTW - I have Brembo,Floating discs and RS29s on my RS
its a good set up but rattles a bit when the pads are worn
tim
I MAY be swapping-in my front ceramics soon in which case the old ones (mint condition) will be for sale as can't be bothered to store them....Im looking for a front ceramic disk !
BTW - I have Brembo,Floating discs and RS29s on my RS
its a good set up but rattles a bit when the pads are worn
tim
gfreeman said:
Where's Kurgen (Rob)?
He had Performance Friction stoppers on his GT2 I recall. I have them fitted to my '3. Only done two trackdays on this set-up but so far I am well impressed.
He had Performance Friction stoppers on his GT2 I recall. I have them fitted to my '3. Only done two trackdays on this set-up but so far I am well impressed.

I had the PFC Version 2 on front, Alcons on the rear with PF pads, braided hoses and SRF, fitted by Fearns.
Awesome pedal feel and bite.. miss them dearly! My standard brakes on the flymo are shocking in comparison, need to upgrade!

Kurgen said:
gfreeman said:
Where's Kurgen (Rob)?
He had Performance Friction stoppers on his GT2 I recall. I have them fitted to my '3. Only done two trackdays on this set-up but so far I am well impressed.
He had Performance Friction stoppers on his GT2 I recall. I have them fitted to my '3. Only done two trackdays on this set-up but so far I am well impressed.

I had the PFC Version 2 on front, Alcons on the rear with PF pads, braided hoses and SRF, fitted by Fearns.
Awesome pedal feel and bite.. miss them dearly! My standard brakes on the flymo are shocking in comparison, need to upgrade!

Gassing Station | Porsche General | Top of Page | What's New | My Stuff



