993 engine upgrades
993 engine upgrades
Author
Discussion

TISPKJ

Original Poster:

3,780 posts

238 months

Monday 8th October 2007
quotequote all
Hi guys, some help please with some prices if possible.

993 non varioram, whats the best way to increase the power, am assuming motor is similar spec to the 964 RS and same mods apply ?, also were all 993's non dual mass flywheel ?
Looking at a car with superchip, RSR exhaust mod, and cup style intake fitted already so whats the most efficent value for money way ahead in terms of additional horse power, also will a GT3 clutch and flywheel fit and will it be of any benefit (assuming it is lighter etc ?)

I am looking to downgrade from a GT3 and just want an idea of what it will cost me and or what to look out for on a car.

Is 300 - 325 bhp available without megga spending ?

Regards

clubsport

7,420 posts

289 months

Monday 8th October 2007
quotequote all
Paul, all 993 ex CS & cuppie came with the dual mass flywheel....I changed the dual mass in my old RS to the single mass,,,I believe same one is the single mass available on mk1 GT3 Cs etc....964 part nos ...

993 lump is similar to 964 but not the same, different inlet/exhaust..note twin exits...964 is more readily tuneable for little £££ than 993 lump.

300 bhp is possible apparently from a decent remap...wonderful Wayne S with free flow cats etc should give 300+ bhp...RSR boxes, air filters, single mass flywheels are unlikely to offer any increase in power.
To get more power as in 320+ you have to get involved in changing barrells etc...motec.....then we are talking relatively poor bhp return per £ spent.

Another option is to fit a supercharger with or without intercooler this gives approx 340 bhp.

Or you could consider a 993TT if you want the power?

993 isn't a particularly fast car, I like the way it drives and communicates, personally find 300 ish bhp is reasonable for road and track use. If anything I would consider how you could de-lard the car rather than make the engine more powerful? wink

ProAna

88 posts

233 months

Monday 8th October 2007
quotequote all
As above, I'd always lose weight before pursuing the expensive and dangerously fruitless quest to increase power.

Handling before power will prove much more profitable.

TISPKJ

Original Poster:

3,780 posts

238 months

Monday 8th October 2007
quotequote all
Hi Paul, thanks, did the clutch flywheel make much odds and was it / is it worth the trouble ? or was it just a case of the clutch needed replacement anyway ?

Car I looked at had been chiped (+12 bhp or so ?)take it this is similar to Motec ?

Would fully agree on weight.
GT3 adjustable suspension units, RS copy wheels, and new Toyo's waiting in shed should the day arrive to change the GT3

clubsport

7,420 posts

289 months

Monday 8th October 2007
quotequote all
The single mass flywheel helps the car rev slightly better, more noise and clatter at idle as per your GT3 no doubt...
At some point the dual mass may well need changing, so I would wait until then, RS clutch & new single mass flywheel is about £1500 fitted.

Motec is a proven full engine management system (costs a few £k), a chip will more likely be a remap,,various formss out there from basically advancing the timing with unkown levels of longevity??? yikes

You can squeaze 285 rears on a 993, but you may have to roll the arches.

Paul, if you do find any possible cars locally, I would be more than happy to go along and kick a few tyres and shake my head with the occasional sharp intake of breath if that would be of any help wink

vpr

3,935 posts

269 months

Monday 8th October 2007
quotequote all
TISPKJ said:
I am looking to downgrade from a GT3 and just want an idea of what it will cost me and or what to look out for on a car.
Regards
Downgrade.......surely you mean upgrade wink

TISPKJ

Original Poster:

3,780 posts

238 months

Monday 8th October 2007
quotequote all
Thanks Paul, I was talking from a performance perspective as to what bits are and are not worth having, but thanks for the offer anyway.

Nice to know that the cluth and flywhel may well be of some use in the future.

Cheers