Rebuild of damaged 07 car.
Discussion
http://cgi.ebay.co.uk/Porsche-911-997-c2s-07reg-da...
Have a look at the above link. How on earth could that be put back on the road? With the way it has been bent nearly every part neds to be swapped out.
You would be able to tell from 300 yards that it wasn't right.
Have a look at the above link. How on earth could that be put back on the road? With the way it has been bent nearly every part neds to be swapped out.
You would be able to tell from 300 yards that it wasn't right.
Ouch ....
I think it all depends on what the damage to underlying chassis is like - provided the majority of the strength is in intact then it is possible. My friend used to be rebuild cars like this - used to import from abroad, convert to right hand drive and sell it on.
I have seen cars like that go in and come out like new. Having driven a few - I was impressed, but still wouldn`t buy one.
I think it all depends on what the damage to underlying chassis is like - provided the majority of the strength is in intact then it is possible. My friend used to be rebuild cars like this - used to import from abroad, convert to right hand drive and sell it on.
I have seen cars like that go in and come out like new. Having driven a few - I was impressed, but still wouldn`t buy one.
From the pics it needs:
Shell
All panels except drivers door
3 or 4 wheels
Complete NSF chassis leg / brakes etc
As the interior has been twisted the drivers seat will be knackered as will most of the trim.
New hood
.... and how many hours of labour?
The thought that they could weld two halves of a 180MPH cabrio together send chills down my spine.
Surely there is a law against this.
Shell
All panels except drivers door
3 or 4 wheels
Complete NSF chassis leg / brakes etc
As the interior has been twisted the drivers seat will be knackered as will most of the trim.
New hood
.... and how many hours of labour?
The thought that they could weld two halves of a 180MPH cabrio together send chills down my spine.
Surely there is a law against this.
nahhhhh..you got it all wrong dude...go to halfords ..couple of tins of body filler ...few tins of sprayPAINT...bobs yah uncle !!!! GOOD AS NEW
quote=Vr6-er]From the pics it needs:
Shell
All panels except drivers door
3 or 4 wheels
Complete NSF chassis leg / brakes etc
As the interior has been twisted the drivers seat will be knackered as will most of the trim.
New hood
.... and how many hours of labour?
The thought that they could weld two halves of a 180MPH cabrio together send chills down my spine.
Surely there is a law against this.
[/quote]
quote=Vr6-er]From the pics it needs:
Shell
All panels except drivers door
3 or 4 wheels
Complete NSF chassis leg / brakes etc
As the interior has been twisted the drivers seat will be knackered as will most of the trim.
New hood
.... and how many hours of labour?
The thought that they could weld two halves of a 180MPH cabrio together send chills down my spine.
Surely there is a law against this.
[/quote]
Not being funny but if the work is done right it is perfectly safe, when cars are made they are manufactured from panels welded together, providing the two halves are joined correctly I.E. Along weld lines, jigged, welded and sealed properly then it is perfectly safe.
But if it is done by a bloke with a mig welder and the seam put right across the floor it isn't.
But if it is done by a bloke with a mig welder and the seam put right across the floor it isn't.
so would you be happy to own this car knowing what its been through...then having your children in it ???
probably not !
i know i wouldnt..
probably not !
i know i wouldnt..
wildoliver said:
Not being funny but if the work is done right it is perfectly safe, when cars are made they are manufactured from panels welded together, providing the two halves are joined correctly I.E. Along weld lines, jigged, welded and sealed properly then it is perfectly safe.
But if it is done by a bloke with a mig welder and the seam put right across the floor it isn't.
But if it is done by a bloke with a mig welder and the seam put right across the floor it isn't.
sportsandclassic said:
How the F**K can that be HPI clear ?
These hpi checks are useless then ...!
Mike
It could have been stuffed on track and the guy not insured?These hpi checks are useless then ...!
Mike
Or he could have stuffed it on the road and wasnt insured so took the monetry hit and sold it-if the police werent involved then no-one will know its crashed and therefore not on HPI. To be on HPI I think an insurance co has to be involved?
I will be happy to be corrected though!
Gassing Station | Porsche General | Top of Page | What's New | My Stuff






