GT3 RS - Extra Beans via Manthey / Carpgraphic / Others
Discussion
drhildr said:
Any comparisons / experiences on the relative merits of Manthey 410 vs Cargraphic (or Others)to breathe a decent extra bit of power into a 996 GT3 Rs without breaking the bank?
I was at Manthey earlier in the year, and they had a 997 GT3 on with their exhaust, but said the rest of a kit was still under development. However, they also said that even they don't think there will be much more than they can eek out of the 3.6, as Porsche seemed to have already taken things pretty much as far as possible this time...If you Increase the power on a 996 GT3 RS and use it on track you will eat through the standard brakes/discs...
next up is the Alcon/Brembo floating disc conversion with RS29s
after this you will find the chassis wanting and then you are in to 3-4K for a suspension/GEO set up !
then you want a firmer ride on track and then you start looking at Uni Ball bushes and different diffs !!!!!!
What Im saying is once you start its an endless road which costs a lot of money !
Good Luck
next up is the Alcon/Brembo floating disc conversion with RS29s
after this you will find the chassis wanting and then you are in to 3-4K for a suspension/GEO set up !
then you want a firmer ride on track and then you start looking at Uni Ball bushes and different diffs !!!!!!
What Im saying is once you start its an endless road which costs a lot of money !
Good Luck
It's already got Alcons / 29's, Parr Motorsport Geo and JZM Suspension so I reckon I'm already well up that long, winding and very expensive road!
timmo said:
If you Increase the power on a 996 GT3 RS and use it on track you will eat through the standard brakes/discs...
next up is the Alcon/Brembo floating disc conversion with RS29s
after this you will find the chassis wanting and then you are in to 3-4K for a suspension/GEO set up !
then you want a firmer ride on track and then you start looking at Uni Ball bushes and different diffs !!!!!!
What Im saying is once you start its an endless road which costs a lot of money !
Good Luck
next up is the Alcon/Brembo floating disc conversion with RS29s
after this you will find the chassis wanting and then you are in to 3-4K for a suspension/GEO set up !
then you want a firmer ride on track and then you start looking at Uni Ball bushes and different diffs !!!!!!
What Im saying is once you start its an endless road which costs a lot of money !
Good Luck
Steve Rance said:
drhildr said:
Any comparisons / experiences on the relative merits of Manthey 410 vs Cargraphic (or Others)to breathe a decent extra bit of power into a 996 GT3 Rs without breaking the bank?
Suspension upgrades are far more effective pound for poundBest get ready to break the bank.
Edited by SidewaysSid on Tuesday 23 October 16:11
Basically the best way is to get a new Exhaust system/ECU upgrade this liberates all the BHP ( like they have done on the 997 GT3 )
but the problem is keeping it to 103db-105db its a fine balance between power/db
So If you go this route you can say goodbye to circuits such Bedford,Goodwood,Castle Coombe,Donnington
and hello to the Nurburgring/SPA and most other European trackdays
I got black flagged last time my RS was at Bedford and the noise police nearly had a heart attack - I knew I was getting thrown off so I gave it some more welly !!!
tim
but the problem is keeping it to 103db-105db its a fine balance between power/db
So If you go this route you can say goodbye to circuits such Bedford,Goodwood,Castle Coombe,Donnington
and hello to the Nurburgring/SPA and most other European trackdays
I got black flagged last time my RS was at Bedford and the noise police nearly had a heart attack - I knew I was getting thrown off so I gave it some more welly !!!
tim
And the Manthey conversion has a grip of the noise issue - claiming to be as quiet as standard....?
Glenn McMenamin said:
ooops, just realised this is about 996 sorry 
As said, you will get a lot more from changing your suspension, than
anything else, especially on track.
The Manthey K410 is a nice addition, and worth while if you are keeping the car for a bit..

As said, you will get a lot more from changing your suspension, than
anything else, especially on track.
The Manthey K410 is a nice addition, and worth while if you are keeping the car for a bit..
drhildr said:
And the Manthey conversion has a grip of the noise issue - claiming to be as quiet as standard....?
Certainly noisier than standard, you won't get on Bedford withough being flagged, unless you lift passed the mics...Glenn McMenamin said:
ooops, just realised this is about 996 sorry 
As said, you will get a lot more from changing your suspension, than
anything else, especially on track.
The Manthey K410 is a nice addition, and worth while if you are keeping the car for a bit..

As said, you will get a lot more from changing your suspension, than
anything else, especially on track.
The Manthey K410 is a nice addition, and worth while if you are keeping the car for a bit..
Goodwood is another no no, maybe Combe too....
Sounds great though..
The obvious solution is to change the final drive ratio in the gearbox. 10-12% acceleration increase with the cup final drive and no messing with an expensive engine.
I find these Manthey type mods extortionate for a remap + exhaust and as mentioned above, you run into trouble with the noise nimbys.
I find these Manthey type mods extortionate for a remap + exhaust and as mentioned above, you run into trouble with the noise nimbys.
DanH said:
I find these Manthey type mods extortionate for a remap + exhaust and as mentioned above, you run into trouble with the noise nimbys.
I agree, the German tackle such as Manthey, Cargraphic et al is mad money, but I guess you pay for the huge R&D that went into their power kits off the back of the race experience? I don't doubt there is a big margin on top too!Edited by MOD500 on Tuesday 23 October 17:50
Gassing Station | Porsche General | Top of Page | What's New | My Stuff







