Discussion
Also 205 or 225 front? what about 215, and are front and back 40 profile..I have been advised to use spacer on rear to fill arches with 255,what thickness spacer. Arches are not rolled.
I had contins on my 965 and would use again mainly fast road use this year,any one say no, if so what do you recommend?
I had contins on my 965 and would use again mainly fast road use this year,any one say no, if so what do you recommend?
Edited by G T 3 on Tuesday 30th October 09:41
17's on my C4. Lowered and setup to a near as poss. to RS spec.
245 SSR's with 15mm spacer on the back
225 SSR's without spacer on the front (but I could do with a 5mm to stop the rubbing on full lock, anyone got a pair cheap?!?!)
Had conti's before but killed them on track, looking for an alternative to SSR's now.
Rob
245 SSR's with 15mm spacer on the back
225 SSR's without spacer on the front (but I could do with a 5mm to stop the rubbing on full lock, anyone got a pair cheap?!?!)
Had conti's before but killed them on track, looking for an alternative to SSR's now.
Rob
Pete,
I have used 205/50/17 and currently use 225/45/17 fronts. With 215/45s the overall tyre diameter is 625mm. 205/50/17=637mm and 225/45/17=634mm so the 215s are a bit out at - i'd avoid it personally. Go for the 225s, you get a fractionally bigger braking footprint & slightly less understeer.
I run RS geom and 225s on the front have caused me no rubbing problems, but some people do get issues with them. I think a 5mm spacer is all thats needed though. Be careful putting too much spacer on the front, the tyre can catch the inner arch and make a mess of it, ask me how i know! I run a fairly safe 15mm spacer on my 255 rears.
and just because everyone else is...

I have used 205/50/17 and currently use 225/45/17 fronts. With 215/45s the overall tyre diameter is 625mm. 205/50/17=637mm and 225/45/17=634mm so the 215s are a bit out at - i'd avoid it personally. Go for the 225s, you get a fractionally bigger braking footprint & slightly less understeer.
I run RS geom and 225s on the front have caused me no rubbing problems, but some people do get issues with them. I think a 5mm spacer is all thats needed though. Be careful putting too much spacer on the front, the tyre can catch the inner arch and make a mess of it, ask me how i know! I run a fairly safe 15mm spacer on my 255 rears.
and just because everyone else is...

G T 3 said:
In the pic arnt they 18 inch turbos?
The do indeed look like them, but they are the 17" Porsche approved replicas, made by Mille Miglia (and no longer available either). Bought the car with them on intending to swap them immediately for Cup1s, but they seem to suit the car and now I can't bring myself to change them!Gassing Station | Porsche General | Top of Page | What's New | My Stuff




