retro fitting PCM to a 911
retro fitting PCM to a 911
Author
Discussion

Paris1000

Original Poster:

4 posts

228 months

Saturday 3rd November 2007
quotequote all
Does anyone have any ideas as to whether or not it's possible to retrofit PCM (inc sat nav) to a 996? Also where's the best place to hold of one? Jasmine or Porsche-A-Part for a PCM module from a write off?

uuf361

3,185 posts

253 months

Saturday 3rd November 2007
quotequote all
It can be done.

Retro-fitted PCM2 to my '04 996 C2 Cab......very pleased with it.

///ajd

8,964 posts

237 months

Saturday 3rd November 2007
quotequote all
how much to retro PCM2? I assume it would have to be in a post facelift Sep02 on 996, rather than a PCM1 vintage car?

Wetwipe

3,019 posts

244 months

Saturday 3rd November 2007
quotequote all
it can definately be done, and it can be a DIY job too. There is a stage by stage tutorial on RennTech which makes it look simple. If you want to install a PCM2 unit then you will need a 2003 model year car to ensure it has the MOST fibre optic cables. If you are running a CDR24 then you will have no problems.

Most of the work is easy to do, and once installed you then need to take it to an OPC or specialist to reprogram the OBC (on board computer) so that it recognises the fitted sat nav as the nav and phone can be controlled via the OBC.

As for locating a PCM - that is more tricky and a breaker is your best bet. Douglas Valley Salvage (I think that is their name) have a huge stock of 996's for breaking and there is also a company in Holland called something along the line of Van Sweedzen who also specalise in breaking pork.

be aware though, if you do buy a used untit it is likely you will have to buy a full set of nav disks (unless they come as part of the deal) and they will set you back £350 ffrom Porsche. Expensive although you do get a nice little leather pouch for them wink