964 stalling!
Author
Discussion

RZD

Original Poster:

141 posts

299 months

Monday 5th November 2007
quotequote all
My car has just developed a rather strange problem in that it will not idle at all once the car has started and will cut out completely when slowing down for corners, traffic lights etcmad. This makes for rather interesting driving having to try and keep the revs up when slowing the car down. When on the move the car drives normally so my initial thoughts are that it must be a sensor of some sort. I have changed the DME relay just in case but this was not at fault.
Has anyone else experienced this before or might be able to shed some light as to what the problem is?
All ideas gratefully receivedsmile.
Many thanks in advance,

Leszek

Pesty

42,655 posts

287 months

Monday 5th November 2007
quotequote all
could be the ISV is either knackered or blocked up with gunk. Thats one of the usual suspects for stalling/bad idling unless you have just fitted a LWF

See this thread for cleaning. its for 993 but 964's have the same valve. If you do remove it just make sure which way round it is first smile not sure if it goes into checking its working but that would also be a good idea

http://p-car.com/diy/isv/

Edited by Pesty on Monday 5th November 21:04

Pesty

42,655 posts

287 months

Monday 5th November 2007
quotequote all
just had another thought. How is your distributer belt. good idea to check that has not snapped to be on the safe side

RZD

Original Poster:

141 posts

299 months

Monday 5th November 2007
quotequote all
Thanks for the info Pestysmile. Very much appreciated!
I will let you know how I get on.
I had the distributor drive belt changed about 3 years ago when I bought the car so I'm hoping it's not the belt...but you never knowscratchchin

Leszek

anonymous-user

85 months

Tuesday 6th November 2007
quotequote all
Has your car been under the hammer recently to have the ecu reset?

melv

4,708 posts

296 months

Tuesday 6th November 2007
quotequote all
When is the last time you gave it a good thrashing??? wink

warmfuzzies

4,383 posts

284 months

Tuesday 6th November 2007
quotequote all
Idle microswitch? DME relay, as Melv says but disconnect battery (reset) and take it for a hoon..

Kevin